Select your vehicle

Daystar Switch Panel with 4 Switches (Tan) – KJ71038TN

Daystar

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2011–2018 Jeep Wrangler JK 2-door and Unlimited 4-door models per the manufacturer fitment list
  • Redesigned tan switch panel for the 2011 and newer Wrangler JK dash, where the older Daystar panel no longer works
  • Holds up to five rocker switches in front of the shifter
  • Kit includes one red, one blue, one amber and one green switch

Description

Overview

The Daystar KJ71038TN Switch Panel in tan is a dash-mounted rocker switch panel for the 2011–2018 Jeep Wrangler JK, covering two-door and Unlimited four-door models. Daystar redesigned its panel because the earlier Wrangler JK switch panel no longer works with the interior Jeep introduced for the 2011 model year.

The panel sits in the lower dash, right in front of the shifter, and holds up to five rocker switches for accessories such as compressors, winches and lights. The tan finish matches the 11–12 JK dash texture, and the same panel is also offered in black (BK).

Key features

  • Room for up to five rocker switches in the ideal location in front of the shifter
  • Installs using the factory clips
  • Tan finish designed to match the dash texture of 2011–2012 Wrangler JK models
  • Kit includes one red, one blue, one amber and one green switch
  • Plastic construction, made in the U.S.A.
  • It is for automatic transmission vehicles only.

Wiring the rocker switches

A rocker switch panel is a control point, not a power source. Each switch sends a signal to a relay or straight to the accessory wiring, so the panel’s job is to keep controls tidy and within reach. Before adding a compressor, winch or light bar, sort out which accessory each switch controls and how much current that accessory draws. Match switch ratings to the load, and place a fuse at the power source for every accessory circuit.

The shifter area is crowded, and the panel sits right in front of the gear selector. Route cables so they stay clear of the shifter boot, the parking brake and any pedal linkage. Pull the panel out only far enough to reach the connections, so the harness behind it is not stressed.

  • Label each switch with the accessory it controls
  • Keep power and ground runs short and secure
  • Check the wiring for chafing after rough trail use

Specifications

Brand Daystar
Part number DAYKJ71038TN
Material Plastic
Color Tan
Mounting location Lower dash, in front of the shifter
Switch capacity Up to five rocker switches
Included switches One red, one blue, one amber, one green
Transmission Automatic transmission only
Origin Made in the U.S.A.
Fitment type Direct fit

Vehicle fitment

It fits 2011–2018 Jeep Wrangler JK 2-door models in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims, and Unlimited 4-door models in the same trims.

The panel is designed for the redesigned 2011 and newer Wrangler JK interior. Check fit against your vehicle’s model year and trim before buying.

Installation notes

Installation uses the factory clips to hold the panel in place. Disconnect the battery before running any new wiring, because the switches power accessories.

What’s included

The kit includes the switch panel with one red, one blue, one amber and one green rocker switch.

Not included: Twenty Amp marine-grade rocker switches, which are available separately, and the accessories you wire to the panel.

SKU: DAYKJ71038TN Categories: , ,

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2011–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will this switch panel fit a 2007 Jeep Wrangler JK?

No. The panel is designed for the redesigned 2011 and newer Wrangler JK interior, so a 2007 model falls outside that design. Confirm your model year and trim before installing.

What switches come with the Daystar KJ71038TN panel?

The kit includes one red, one blue, one amber and one green rocker switch. The panel holds up to five rocker switches in total. Twenty Amp marine-grade rocker switches are available separately if you want that rating for your accessories.

Does the panel work in manual transmission Wranglers?

No. It is made for automatic transmission vehicles only, so confirm compatibility for your vehicle before installing the panel in a manual Wrangler.

How do I keep the wiring behind the panel tidy?

Bundle the accessory wires with zip ties and route them away from the shifter, the parking brake cable and the pedal linkage. Leave a little slack at the panel so it can be removed for service without pulling on the connections.

Should the panel be removed for routine checks?

Not usually. Inspect the switch faces, connectors and harness from time to time, and remove the panel only when a switch needs replacing or a wire needs attention.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon