Overview
The Redarc RedVision RAETVMS1280-NA is a total vehicle management system for 4WD, camper, trailer, RV and motorhome setups. It lets you control and monitor several on-board devices from one display and mobile app. It is universal fit, so it is not tied to a specific vehicle model.
RedVision can switch on and off devices such as turning lights, inverters, water pumps, televisions, electric steps and fridges. It also monitors water levels, temperatures, energy consumption and storage. Battery information is available when it is used with a REDARC Manager30 battery management system. It suits overlanding vehicles, camper trailers and motorhomes where many functions need one control point. The display and app use a modern, user-friendly interface with an easy to understand system layout.
Key features
- Controls multiple on-board devices, including turning lights, an inverter, water pumps, televisions, electric steps and fridges, from one place.
- Monitors water levels, temperatures and energy (battery power) consumption and storage.
- Shows battery information when used with a REDARC Manager30 battery management system.
- Includes an in-vehicle mounted display and a mobile friendly app.
- Uses an easy to understand system layout with a user-friendly interface.
- The display is designed to withstand tough conditions.
Planning a multi-device setup
A system like this works best when you map every load before mounting the display. List each light, pump, fridge and inverter, note how much power each draws from the battery, and decide which should be switched from the cab and which should stay on a fixed circuit. Place the display where it can be read safely while driving so levels and temperatures are easy to check on long trips.
The controlled loads are the main wiring task. Fuse each circuit to suit its load, keep high-current cables short, and protect every connection from water and vibration. Some older devices need a relay before a central unit can switch them. If you add a battery management system later, plan space and cable routing for it at the same time.
Specifications
| Brand | Redarc |
|---|---|
| Part number | RAETVMS1280-NA |
| Product type | Total vehicle management system |
| Components | In-vehicle mounted display and mobile friendly app |
| Fitment | Universal fit |
Vehicle fitment
Redarc lists RedVision as universal fit, so it is not vehicle-specific. It is intended for 4WD, camper, trailer, RV and motorhome applications. Mounting location and wiring must suit your particular build.
Installation notes
RedVision switches loads such as pumps, lights and fridges, and the battery information needs a REDARC Manager30. Wire the controlled loads and the Manager30 connection with appropriate fusing, and disconnect the battery before any wiring work.
What’s included
RedVision comes equipped with an in-vehicle mounted display and a mobile friendly app.
Not included: The REDARC Manager30 battery management system is needed for battery information and is not part of this item.












