Overview
The Advanced Accessory Concepts Overhead 6 Switch Remote Panel, part number AAC2008-6, is an overhead switch panel for 2007-2018 Jeep Wrangler JK models, in 2-door and 4-door bodies. It mounts above the rear view mirror and is designed only for use with the Trigger 6 Shooter controller, which is sold separately.
Running accessory wiring under the dash or through the firewall is the usual job when adding accessories to a Jeep, and loose cable on rough trails is a concern for any owner. Advanced Accessory Concepts builds trigger accessory control systems and switch pods to reduce that routing. The brand describes its trigger control systems as coming with a universal mount, battery-powered RF remote, phone and tablet Bluetooth control, and manual on/off switches on the top of the case. This overhead panel is one of the switch options in that range, aimed at owners who want switching above the windshield without new wires under the dash.
Key features
- Mounts above the rear view mirror
- No drill installation
- Plastic body with a steel sub-structure
- Six switches in a single overhead layout.
- Designed only for the Trigger 6 Shooter controller, sold separately
- Fits 2007-2018 Jeep Wrangler JK, 2-door and 4-door models
Choosing a switch layout
An overhead switch panel keeps controls within reach while you drive, which suits trail work where you want lights or other accessories without looking down. Before you commit, count the circuits you plan to run and make sure the six switches cover them with some spare capacity for later additions. Think about which functions you use most, and place those switches where your hand naturally rests.
Wiring is the part most owners underestimate. Route the harness along existing body channels, keep it clear of steering and airbag components, and add strain relief at each connection so vibration does not pull on terminals. Check fuse ratings for each accessory before the first power-up, and recheck mounts and connectors after the first few trail runs.
Specifications
| Brand | Advanced Accessory Concepts |
|---|---|
| Part number | AAC2008-6 |
| Product type | Overhead switch remote panel |
| Switch count | 6 |
| Body | Plastic with steel sub-structure |
| Mounting location | Above the rear view mirror |
| Installation | No drill installation |
| Compatible controller | Trigger 6 Shooter, sold separately |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer list places this panel on the 2007-2018 Jeep Wrangler (JK) in 2-door and 4-door bodies. Listed trims include the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X on the 2-door, and the Unlimited 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X on the 4-door.
Earlier TJ and LJ Wranglers and the later JL generation are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No drilling is needed, and the panel sits above the rear view mirror. It works only with the Trigger 6 Shooter controller, so confirm that controller is the one you plan to run before installing the panel. Disconnect the battery before routing any wiring for the panel and its controller.
What’s included
The overhead 6-switch remote panel and its above-mirror mount are the included items. Check the package contents against your installation before starting.
Not included: The Trigger 6 Shooter controller, which is sold separately.









