Overview
The SPOD BantamX Touchscreen and 84 Inch Battery Cables, part number PODBX-TSB-UNI-84, is an 8-circuit expandable control system that powers and controls 12/24VDC aftermarket accessories through one ethernet cable into the cab. The design needs no cutting, no fishing wires into the cab and no tapping into the vehicle’s electrical system. It is universal fit, not built for one vehicle.
The BantamX is run from a touchscreen, and its small footprint lets you place it in many locations. Basic switch programming runs through the sPOD Mobile App, while the Pro-Series mobile app adds circuit timers, switch lockout, always-on circuits and custom flash patterns, which are only available through that app.
Key features
- 8 circuits, expandable, rated at 30 amps at 12.5 VDC per circuit and operating on 12VDC or 24VDC
- Fully programmable, digital controlled system with built-in Bluetooth for remote control
- 16-position terminal block for attaching accessories, plus an 8-position input terminal block for controlling outputs
- 2 controller ports (RJ45) for Ethernet cables, and up to 4 BantamX units can be daisy chained under one Touchscreen
- Integrated low voltage cutoff (LVCO) battery protection with optional override, using one ATM mini-style fuse for protection and reset
- Self-healing fault protection from 1.5 to 30amps using current-sensing MOSFETs controlled by a microprocessor, with no fuses and relays
- 50amp auto-resetting circuit breaker
- Nylon braided 84 Inch battery cables with hi-strand crosslinked copper wire and a silicone jacket
- Ignition control and safety lock-out for switches 1 and 2 (optional)
- Protection against overheating, over-current, shorts, reverse polarity and field collapse
Touchscreen placement and wiring
The touchscreen can go in several spots, so choose one that keeps the screen visible without blocking the driver’s view or the passenger’s reach to controls. Confirm that the Ethernet cable reaches the controller port with room to spare. Mount the touchscreen on a solid surface, because a loose mount makes the controls harder to press reliably.
Plan the accessory wiring before connecting anything. Each circuit should be matched to the load it feeds, and any load that could pull close to the circuit limit deserves a closer look before installation. Battery protection is built into the system, but good wire routing still matters. Keep cables away from heat and sharp edges, and use grommets where they pass through metal.
- Decide early whether switches 1 and 2 need ignition control
- Map each accessory’s draw against its circuit before wiring
- Secure cables so the touchscreen cable does not pull at the port
Specifications
| Brand | SPOD |
|---|---|
| Part number | PODBX-TSB-UNI-84 |
| Model | BX-TSB-UNI-84 |
| Circuits | 8, expandable |
| Circuit rating | 30 amps at 12.5 VDC per circuit |
| Operating voltage | 12VDC or 24VDC |
| Terminal blocks | 16-position output, 8-position input |
| Controller ports | 2 (RJ45) for Ethernet cables |
| Circuit breaker | 50amp auto-resetting |
| Fault protection | Self-healing, 1.5 to 30amps |
| Battery cables | Nylon braided, 84 Inch |
| Base | Powder coated steel base with built in hardware |
| Lid | Aluminum with thumb screw fastening and silicone gasket for weatherproofing |
| Mounting | Universal, with vehicle specific options |
| Air pressure gauge | Not included |
| Fitment | Universal Fit |
Vehicle fitment
BantamX is universal fit, with universal and vehicle specific mounting options, so it is not tied to one make, model or year. Choosing the mounting option that suits your vehicle is up to you.
No vehicle years or models are named for this product. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the wiring for every accessory before mounting, because no wiring diagram is given. Ignition control and lock-out for switches 1 and 2 is optional, so decide early which switches need it. Compare each load’s current draw with the 30 amps rated per circuit, and position the touchscreen so its Ethernet cable reaches the controller ports without strain.
What’s included
The set includes a BantamX Touchscreen and 84 Inch battery cables, along with switches.
Not included: Air pressure gauge, and external controller options such as third party switches, computers, Arduino, Raspberry Pi, the Alpine Audio systems KAC-001 head unit controller, and sensors or thermostats, which can only be used with an sPOD controller.

















