Overview
The Daystar KU70056YL is a D-ring isolator, a pair of polyurethane sleeves that fit standard 3/4-inch d-rings or shackles and keep metal from contacting the vehicle. Daystar designed the isolator to stop shackle rattle and to protect the anchor point or bumper from scratches during recovery-point contact.
Off-road owners who run a shackle on a bumper or other recovery point can use the Daystar D-Ring Isolator to reduce noise while driving. Polyurethane acts as a cushion between the shackle and the mounting point, so the shackle does not tap against the bumper or recovery point when the vehicle is in motion. It is a small accessory rather than a vehicle-specific part, so it suits any vehicle that uses a 3/4-inch d-ring or shackle.
Key features
- Polyurethane construction for a durable isolator between the shackle and the mounting point.
- Stops the shackle from tapping against a bumper or other recovery point while the vehicle is in motion.
- Helps protect the bumper finish from scratches caused by d-ring contact.
- Snaps into place and can be installed or removed in moments.
- Fits standard 3/4-inch d-rings or shackles.
- Sold as a pair.
- Carries a limited lifetime warranty.
Choosing a shackle isolator
Shackles and d-rings take the most abuse at the points where they touch the bumper, a recovery point or a mounting tab. Metal on metal produces the tapping that many drivers notice on rough roads, and it slowly marks paint and powder coat. A polyurethane sleeve sits between those surfaces, so the contact is softened rather than stopped entirely. Think of it as a wear part, since it takes the rubbing that would otherwise land on the bumper.
When you pick an isolator, match its size to the shackle body and check that it seats fully without forcing. Inspect it after each trip for cracks, flat spots or dirt packed into the opening. Sand and mud can grind the surface, so rinse it when you clean the rig. Replace it when it no longer grips the shackle snugly, because a loose sleeve can still rattle.
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70056YL |
| UPC | 814423018845 |
| Material | Polyurethane |
| Fits | Standard 3/4-inch d-rings or shackles |
| Quantity | Pair |
| Color | Yellow (black and red also mentioned) |
| Warranty | Limited lifetime |
Vehicle fitment
It is a universal accessory with no vehicle-specific fit. Compatibility depends on the diameter of the recovery point, not on the year, make or model of the vehicle. Confirm the d-ring or shackle is a 3/4-inch size before ordering.
The isolator is not designed for a specific vehicle or bumper model. Check that your shackle or d-ring is a standard 3/4-inch size before ordering.
What’s included
One pair of Daystar D-Ring Isolators.
Not included: the shackle or d-ring that the isolator fits over.
















