Overview
The Daystar Locking D-Ring Isolator and Washer Set, part number KU70059RE in Red, pairs two locking isolators with eight D-ring washers for quieter recovery points. The isolators install on any standard 3/4″ shackle, and their attached lanyard keeps the D-ring bolt from unscrewing, so the D-ring cannot fall off during use.
Polyurethane isolates the shackle, preventing it from tapping against a bumper or another recovery point while the vehicle is in motion. The isolator also helps protect the bumper finish from scratches made by D-ring contact.
Key features
- Two Locking D-Ring Isolators with an attached lanyard
- Eight D-Ring Washers that reduce rattling beyond the isolator alone
- Attached lanyard loops through the hole in the D-ring bolt
- Fits any standard 3/4″ shackle or D-ring
- Polyurethane construction isolates the shackle from bumpers and recovery points
- Available in Black, Red, Blue, Orange, Purple, White, Yellow, Fluorescent Orange, Fluorescent Green and Fluorescent Pink
Quieting recovery points
Rattle at a recovery point happens when the D-ring bolt backs out or the shackle taps the bumper over rough ground. The locking isolators address both, using the lanyard to hold the bolt and the polyurethane to keep the shackle off metal. Washers add a second layer of padding at the pin, which helps where the isolator alone leaves gaps.
Lanyards and polyurethane both age with use. Look for frayed lanyard strands, stretched loops and cracks in the isolator, since any of these reduces the hold on the D-ring bolt. Replace the kit as a set so the isolators and washers keep matching fit.
- Check the lanyard loop before each trip
- Confirm the bolt is seated before loading
- Clean grit from the washers at each service
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70059RE |
| Product type | Locking D-Ring Isolator and Washer Set |
| Included isolators | 2 Locking D-Ring Isolators |
| Included washers | 8 non-locking D-Ring Washers |
| D-ring size | Standard 3/4″ |
| Material | Polyurethane isolators |
| Color | Red |
| Fitment | Universal Fit |
Vehicle fitment
This kit is universal fit, so it installs on any standard 3/4-inch shackle or D-ring used on an off-road vehicle, whatever its year, make or model.
Check that your D-ring or shackle is a standard 3/4″ size before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each isolator snaps onto the D-ring, and its attached lanyard loops through the hole in the D-ring bolt to stop the bolt from backing out. The eight washers work alongside the isolators; Daystar says they silence rattles even more than the isolator alone.
What’s included
The kit includes 2 Locking D-Ring Isolators and 8 non-locking D-Ring Washers, all in Red.









