Overview
The Daystar Locking D-Ring Isolator in black, part number KU70058BK, is a polyurethane isolator that snaps onto any standard 3/4 inch D-ring, also called a clevis or shackle. Its built-in lanyard loops through the hole in the D-ring bolt, which helps keep the bolt from unscrewing itself. It is a universal accessory, not built for one vehicle model.
The isolator is meant to stop D-ring rattles and to protect the bumper finish where the D-ring makes contact. The lanyard also means the D-ring stays with the rig. Daystar makes the locking version in black, red, royal blue, orange, purple, white, yellow, fluorescent orange, fluorescent green and fluorescent pink.
Key features
- Built-in lanyard loops through the hole in the D-ring bolt
- Helps keep the D-ring bolt from unscrewing itself
- Polyurethane isolator that stops D-ring rattles
- Snaps onto any standard 3/4 inch D-ring, clevis or shackle
- Comes as a pair
- Made of durable polyurethane
Choosing a D-ring setup
A D-ring isolator is a small part, but it does useful work on any vehicle that carries recovery hardware. On the trail, a D-ring that is loose against the bumper or mounting tab will clang with every bump. A cushion between the metal and the mounting surface reduces that noise and cuts down on scratches to paint and powder coat. The isolator sits on the outside of the shackle body, so it does not change how the recovery gear loads the vehicle.
Before choosing a set, measure the D-ring or clevis diameter and confirm it is a standard 3/4 inch size. Look at the bolt and pin as well, since a worn or loose bolt causes more rattle than the isolator can absorb. Tighten the bolt before each trip and check the lanyard for cracks. Polyurethane wears from sun and grit over time, so replace an isolator that has split, flattened or lost its grip on the shackle.
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70058BK |
| UPC | 618089010409 |
| Color | Black |
| Material | Durable polyurethane |
| Fits | Standard 3/4 inch D-ring, clevis or shackle |
| Included | Built-in lanyard |
| Not included | Polyurethane washers |
| Quantity | Pair |
Vehicle fitment
This is a universal accessory, and no vehicle fitment is listed. The isolator is sized to the D-ring rather than the vehicle, so check that the D-ring is a standard 3/4 inch size first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lanyard should loop through the hole in the D-ring bolt as part of the setup. Polyurethane washers come separately and are not included, so plan for them if your setup calls for them.
What’s included
A pair of black Locking D-Ring Isolators with built-in lanyards.
Not included: polyurethane washers, which are available separately, along with D-rings and shackles.









