Overview
The Daystar glow-in-the-dark D-Ring Isolator, part number KU70056GD, is a polyurethane cover for standard 3/4 inch D-rings and shackles. It snaps onto the shackle so metal does not strike the bumper during travel, and it keeps the D-ring from scratching anchor points or bumper finish. It is a universal fit part.
The glow-in-the-dark finish is the distinguishing feature of this version. Otherwise the isolator works like the standard Daystar D-Ring Isolator, with the same polyurethane body and the same 3/4 inch fit. It comes as a pair, which gives two matching pieces for two recovery points on the same vehicle.
Key features
- Glow-in-the-dark finish that helps locate the D-ring in low light
- Polyurethane isolator for standard 3/4 inch D-rings or shackles
- Reduces rattles from the shackle contacting the bumper
- Protects bumper finish and anchor points from scratches
- Comes as a pair
- Limited lifetime warranty
Trail-ready recovery hardware
Recovery hardware tends to get handled in the dark, whether you are rigging a stuck vehicle at dusk or fishing gear out of a rear compartment. A finish that shows in low light makes the shackle and isolator easier to locate without a headlamp. The color is a visibility feature only, so it does not change how the isolator cushions the shackle against the bumper.
Fit matters more than finish. Check that the D-ring or shackle is a standard 3/4 inch size, then snap the isolator on so it sits flush against the body. Tighten the bolt and pin before each trip, because a loose connection rattles even with a good cover. Polyurethane can crack or flatten over time, so swap a worn isolator instead of stretching it back onto the shackle.
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70056GD |
| UPC | 618089005337 |
| Color | Glow in the Dark |
| Material | Polyurethane |
| Fits | Standard 3/4 inch D-rings or shackles |
| Quantity | Pair |
| Warranty | Limited lifetime |
Vehicle fitment
Universal fit: the isolator is sized to the recovery point rather than to a vehicle, so no make, model or year is listed. Confirm that the D-ring or shackle is a standard 3/4 inch size before you start the install.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Snap the isolator over the shackle so it sits flush against the body; a loose isolator can still rattle on the trail. Recheck the seating after the first few uses.
What’s included
A pair of glow-in-the-dark D-Ring Isolators.
Not included: D-rings, shackles or recovery straps.









