Overview
The Daystar KU70056RE is a red D-Ring Isolator made from polyurethane. It slips over a standard 3/4 inch D-ring or shackle and sits between the metal and the bumper, so the shackle does not strike the bumper while the vehicle is moving. Daystar makes it as a universal accessory, so it is not tied to one make or model.
Red is one of several colors in the Daystar D-Ring Isolator range, and a pair gives you matching isolators for two recovery points. The soft material also protects the finish of the bumper and the anchor point where the D-ring makes contact.
Key features
- Red polyurethane isolator for standard 3/4 inch D-rings and shackles
- Quiets rattles from the D-ring when driving over rough ground
- Keeps the shackle from scratching bumper paint and anchor points
- Snaps on and off the shackle body
- Comes as a pair, so both recovery points can match
- Limited lifetime warranty
Choosing the right setup
A D-ring isolator only does its job when the shackle body it covers is the right size. Before buying, measure the pin or body of the shackle you use most and confirm it is a standard 3/4 inch size. A sleeve that is slightly too loose will slide and rattle, while one that is too tight can be hard to seat in the cold.
Recovery gear often gets replaced in sets, so it makes sense to inspect the D-ring bolt, the shackle pin and the isolator together. Matching the isolator to the shackle you actually carry keeps the setup simple on the trail.
- Measure the shackle body before choosing a size
- Check that the isolator seats fully before every pull
- Inspect the D-ring bolt when you replace the isolator
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70056RE |
| UPC | 814423018838 |
| Color | Red |
| Material | Polyurethane |
| Fits | Standard 3/4 inch D-rings or shackles |
| Quantity | Pair |
| Warranty | Limited lifetime |
Vehicle fitment
It is a universal accessory, not made for a particular make, model or year. The recovery point decides fit, so it must be a standard 3/4 inch D-ring or shackle.
Compare the shackle size on your rig with the 3/4 inch spec above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the isolator sits fully on the shackle body before a recovery pull, and make sure the D-ring it covers is the 3/4 inch size.
What’s included
A pair of red D-Ring Isolators.
Not included: D-rings, shackles and recovery straps.












