Overview
The Daystar D-Ring Isolator, part number KU70056ZM, is a polyurethane sleeve for standard 3/4-inch shackles and D-rings. Its role is to keep recovery shackles from clanking against the bumper while the vehicle moves, and to shield the bumper’s paint from metal contact.
Daystar’s description for this line says its isolators can add color to an off-road vehicle. The product is sold in pairs and sits alongside other Daystar off-road accessories such as jack isolators, bump stops and dash panels.
Key features
- Polyurethane construction
- Fits any standard 3/4-inch D-ring or shackle
- Stops shackle rattles
- Protects anchor points and bumper finish
- Sold in pairs
- Universal Fit
Trail noise and shackle wear
Rattling is usually the first sign that a shackle is moving against something it should not touch. On a rough trail the shackle swings with each bump, and a bare steel bow can knock the bumper, a tow point or a mounting plate many times in a single climb. Over months, that hammering wears the bumper coating and can mark the shackle body. A sleeve placed over the contact point takes the impact instead.
Shackles also need regular attention even when they are quiet. Grit and road salt work into the gap between the pin and the bow, so clean the hardware after muddy outings. Look for flat spots or bright wear on the bow, since these show where the metal has been striking. If a sleeve shows wear first, that usually means the shackle is moving more than it should, and the pin fit deserves a closer look.
- Clean mud and salt from the shackle after trail use
- Look for bright wear marks on the bumper coating
- Check the pin for play or looseness
- Replace a sleeve that no longer covers the contact point
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70056ZM |
| UPC | 618089005368 |
| Material | Polyurethane |
| Shackle size | Standard 3/4-inch |
| Quantity | Sold as a pair |
Vehicle fitment
It is a universal fit, so no particular vehicle applies. It suits any recovery point that takes a standard 3/4-inch D-ring or shackle.
Check the diameter of your D-ring or shackle, because the fit described is for standard 3/4-inch hardware.
Installation notes
The isolator snaps over the shackle and can be removed in moments, so it is quick to take on or off between trips.
What’s included
A pair of Daystar D-Ring Isolators.









