Overview
The Daystar Locking D-Ring Isolator in red, part KU70058RE, is a polyurethane isolator that snaps onto a standard 3/4 inch D-ring, also called a clevis or shackle. It stops the D-ring from rattling against the bumper and protects the bumper finish. It is universal fit, so it works with any standard 3/4 inch D-ring.
The built-in lanyard loops through the hole in the D-ring bolt, which keeps the bolt from unscrewing itself so the D-ring is not lost.
Key features
- Snaps onto any standard 3/4 inch D-ring
- Built-in lanyard loops through the D-ring bolt hole
- Durable polyurethane construction
- Stops D-ring rattle and protects the bumper finish
- Available in black, red, royal blue, orange, purple, white, yellow, fluorescent orange, fluorescent green and fluorescent pink
Before a recovery pull
Before any pull, the D-ring and its bolt take the strain of the recovery, and a loose fitting is the most common reason hardware fails or gets lost. Seat the isolator fully on the D-ring, confirm the bolt is tight, and check that the lanyard runs through the bolt hole. These quick steps reduce noise during normal driving and keep the setup secure when it matters.
After a recovery, look over the isolator for cuts, cracks or flattened areas in the polyurethane. Check the bolt and lanyard too, since a stretched or frayed lanyard will not hold the bolt in place. Replace any part that shows damage before the next trip.
- Seat the isolator fully before pulling
- Inspect the isolator after each recovery
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70058RE |
| UPC | 618089010423 |
| Material | Polyurethane |
| D-ring size | Standard 3/4 inch |
| Color | Red |
| Lanyard | Built-in |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and not built for a particular year, make or model. It fits any standard 3/4 inch D-ring.
Confirm the D-ring is a standard 3/4 inch size before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Snap the isolator onto the D-ring, then loop the built-in lanyard through the hole in the D-ring bolt so the bolt cannot unscrew itself.
What’s included
The Daystar Locking D-Ring Isolator in red, with its built-in lanyard.









