Overview
The Daystar D-Ring Isolator, part number KU70056PR, is a pair of polyurethane isolators that snap onto a standard 3/4-inch D-ring shackle to stop it from tapping against a bumper or other recovery point.
The isolators are made of polyurethane, snap into place and install or remove in moments. They stop the shackle from rattling and protect the bumper finish from scratches caused by D-ring contact. They come in Black or Red and are sold in pairs.
Key features
- Fits standard 3/4-inch shackles
- Durable polyurethane construction
- Snaps into place; can be installed or removed in moments
- Stops the shackle from tapping against the bumper or another recovery point while driving
- Protects the bumper finish from scratches caused by D-ring contact
- Sold in pairs; available in Black or Red
Shackle care and recovery safety
A D-ring shackle is one of the more common sources of rattle on a trail rig, and a rubber or polyurethane sleeve is a simple fix. The isolator sits between the pin and the bumper or recovery point, so the shackle moves without striking metal. Fit the isolator before the shackle is loaded, and check that it stays seated after the first few drives.
The shackle itself deserves the same care. Check the pin is fully seated and secured, look at the threads and the shackle body for wear, and never substitute a pin that does not match the rating. Keep the recovery kit dry and clean, and replace any part that shows bending, cracks or corrosion.
- Confirm the pin is fully seated
- Check shackle body for wear
- Keep isolators clean and dry
- Replace any bent or cracked gear
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70056PR (DAYKU70056PR) |
| UPC | 618089005344 |
| Product type | D-ring (shackle) isolator |
| Material | Polyurethane |
| Shackle size | Standard 3/4-inch shackle |
| Quantity | Sold in pairs |
| Colors | Black or Red |
| Fitment type listed | Universal fit |
Vehicle fitment
The D-ring isolator is not vehicle-specific. It is a universal fit for any standard 3/4-inch shackle, so measure the shackle before ordering.
Shackles that are not standard 3/4-inch size may not accept this isolator. Confirm the shackle size for your recovery setup before ordering.
Installation notes
Match recovery accessories to the working load rating of the rest of your setup and inspect them for wear or damage before every use. Never use damaged recovery gear.
Inspect the isolators regularly to confirm they are still seated and show no cracking, tearing or other damage, and replace them if they do. An isolator protects and quiets the shackle only. It does not change the rating of the shackle, D-ring or recovery point, so keep using properly rated recovery equipment.
What’s included
One pair of D-ring isolators.
Not included: Shackles or D-rings are not included.









