Overview
The Daystar KA09100BK is a 2-inch polyurethane suspension lift for the Kia Sorento, sold under part number DAYKA09100BK. It uses a polyurethane strut spacer at the front and a coil spring spacer at the rear, and it supports a maximum tire size of 32 inches.
The Comfort Ride kit is bolt-on, with no welding or cutting, and it works with the factory suspension and steering geometry to keep the ride and handling intended for the vehicle. Wheel alignment is needed after installation. The kit is sold complete, with hardware included.
Key features
- 2-inch lift with polyurethane front strut spacer
- Rear coil spring spacer
- Complete kit with hardware
- Bolt-on installation, no welding or cutting
- Maximum tire size of 32 inches
- Black finish
Choosing the right alignment shop
A bolt-on polyurethane spacer and a coil spring spacer change the front and rear ride height without welding. Because the front strut spacer alters the strut geometry, camber and caster can move. That is why an alignment is needed after the work, and why it is worth choosing a shop that measures the full setup rather than only toe.
Polyurethane spacers do not absorb road impacts the way a stock strut does, so the ride may feel firmer over broken pavement. Keep an eye on the tie rod ends, ball joints and steering components during routine inspections. Bushings near the spacer should be checked for splitting, and any worn parts should be replaced before the next alignment.
- Ask for a full four-wheel alignment report
- Check the bolts that hold the spacers after the first week
- Compare brake line length with the new ride height
- Retorque hardware at the first oil change
Specifications
| Brand | Daystar |
|---|---|
| Part number | DAYKA09100BK |
| Lift height | 2 inches |
| Front lift component | Polyurethane strut spacer |
| Rear lift component | Coil spring spacer |
| Maximum tire size | 32 inches |
| Finish | Black |
| Wheel alignment | Required after installation |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits 2006 to 2009 and 2011 to 2012 Kia Sorento models in the Base, EX, LX and SX versions.
2010 Sorento and 2013 and later models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is bolt-on, so no welding or cutting is needed. A wheel alignment is required once the spacers are in. Check brake line length and driveline angles after installation.
What’s included
The kit is a complete lift kit with hardware, including the polyurethane front strut spacer and the rear coil spring spacer.









