Overview
The Daystar KT09106BK is a 2.5-inch suspension lift with a front strut spacer, rear coil spring spacers, bump stops and a hardware kit. The manufacturer fitment list covers the 1996-2002 Toyota 4Runner, including Base, Limited and SR5 models.
Daystar describes its Comfort Ride kits as a way to add ground clearance and room for larger tires while keeping most of the stock components. Shocks are not included with this kit.
Key features
- 2.5-inch lift height
- Front strut spacer
- Rear coil spring spacers
- Bump stops
- Black finish
Spacer lifts on a 4Runner
A spacer lift adds ground clearance by raising the suspension without replacing the springs. The front strut spacer and rear coil spacers keep most stock components in service, which keeps the ride close to factory. The trade-off is that suspension geometry changes slightly, so alignment and driveline angles deserve a check after installation.
Because shocks are not part of this kit, the existing units carry the load at the new ride height. Look at them for leaks and worn bushings before installing, and decide whether they will keep up with the taller stance. Bump stops are included, which help limit travel at full compression. Check and re-tighten the hardware after the first few drives.
- Check alignment after the spacers are installed
- Inspect existing shocks for leaks and worn bushings
- Re-tighten hardware after the first few drives
- Check the brake lines and driveline for clearance
Specifications
| Brand | Daystar |
|---|---|
| Part number | KT09106BK |
| UPC | 814423010955 |
| Lift height | 2.5 inches |
| Front | Strut spacer |
| Rear | Coil spring spacers |
| Color | Black |
| Shocks | Not included |
Vehicle fitment
The manufacturer fitment list covers the 1996-2002 Toyota 4Runner, in the models shown on the list.
It fits the 1996-2002 Toyota 4Runner, in the Base, Limited and SR5 models. Confirm your vehicle’s year, model and trim before ordering, especially for Tacoma, Sequoia and 2003 and later 4Runner models.
What’s included
A front strut spacer, rear coil spring spacers, bump stops and a hardware kit.
Not included: shock absorbers.







