Overview
The Daystar DAYPAPLS993 is a 3-inch Premium Lift System for the 2012–2018 Jeep Wrangler JK, in two-door and four-door (Unlimited) form. Daystar’s Performance Accessories PLS993 combines a body-lift and leveling kit to raise the vehicle 3 inches without modifying the existing suspension components, which lets the Wrangler run tires up to 35 inches in diameter.
The system works as a body-lift style install: urethane spacers go at the front coil springs, nylon lift blocks add height at the body mounts, and urethane Gap Guard wheel well extensions cover the space between the body and frame. Installation takes about 4 hours, and the kit is made in the U.S.A.
Key features
- Raises the vehicle 3 inches without modifying existing suspension components
- Allows tires up to 35 inches in diameter
- Works on 2WD and 4WD models
- Front urethane coil spring spacers, 1-3/4 inch
- Fiberglass reinforced nylon lift blocks, 1 inch
- Urethane Gap Guard wheel well extensions
- High strength hardware
- Made in the U.S.A.
Choosing a body-lift setup
A body-lift style system raises the body while the frame and drivetrain stay where they were. That is a different approach from a suspension kit, and it lifts the cab and bed without changing how the axles and springs work. Because the body moves, the hoses, wiring and steering shaft connections are the parts to watch. Fasteners may need retightening after the first drives, and the body mounts should be checked for movement.
Tire size and drivetrain both matter for the setup. Tires up to 35 inches in diameter fit this system, so stay within that limit. Owners of 2WD and 4WD trucks should check the driveshaft for vibration, since the change in height can alter angles. Urethane wheel well extensions may need periodic inspection for cracks or loose clips.
Specifications
| Brand | Daystar |
|---|---|
| Part number | DAYPAPLS993 |
| Lift height | 3 inches |
| Front spacer | Urethane coil spring spacer, 1-3/4 inch |
| Lift block | Fiberglass reinforced nylon, 1 inch |
| Maximum tire diameter | 35 inches |
| Drive type | 2WD and 4WD |
| Installation time | About 4 hours |
| Origin | Made in the U.S.A. |
Vehicle fitment
The system fits 2012–2018 Jeep Wrangler JK two-door and Unlimited four-door models, across 75th Anniversary, Rubicon, Sahara, Sport and Sport S versions.
Wrangler JK models from 2007 through 2011 are not on the list, and the 2019 and later Wrangler JL is not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A body-lift style install raises the body off the frame, so check the brake lines, steering shaft and wiring for stretch after the kit is in. Daystar gives about 4 hours for installation.
What’s included
The kit includes 1-3/4 inch front urethane coil spring spacers, 1 inch fiberglass reinforced nylon lift blocks, high strength hardware and urethane wheel well extensions (Gap Guards). It contains everything needed for installation.







