Select your vehicle

Daystar 2.5 Inch Rear Leveling Kit – KT09108BK

Daystar

Shop Daystar Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 2.5 inch rear ComfortRide lift kit, black
  • Built for 32 inch tires
  • Part number KT09108BK, UPC 814423010979

Description

Overview

The Daystar KT09108BK is a 2.5 inch rear lift kit from the ComfortRide line, finished in black. It is built for 32 inch tires, and wheel alignment is needed after installation.

Daystar says ComfortRide kits add ground clearance and room for larger tires while the rest of the suspension stays close to stock. No vehicle is named on this kit.

Key features

  • 2.5 inch rear lift
  • Built for 32 inch tires
  • Black finish
  • Wheel alignment needed after installation

Rear ride height and driveline

Raising the rear changes the angles of the driveshaft and the suspension arms, which is why the height change is followed by a check of the driveline. Pinion angle and the joints at each end of the shaft should be looked at once the truck sits at its new height, because a large angle change can cause vibration at highway speed.

Shock length and brake hose length also matter at the rear. A higher ride height can extend the shocks and put more strain on the brake lines, so inspect both after installation. Tire clearance at full compression and full lock should be checked as well, especially with the 32 inch tire size this kit is built for.

  • Check pinion and driveshaft angles after install
  • Inspect rear shock mounts and bushings
  • Confirm brake hose length at the new height
  • Recheck fasteners after the first few drives

Specifications

Brand Daystar
Part number KT09108BK
UPC 814423010979
Lift 2.5 inches
Position Rear
Tire size 32 inch
Color Black

Vehicle fitment

It is built for a rear lift of 2.5 inches and 32 inch tires. Verify the fit against your vehicle’s year, model and trim before buying.

Installation notes

Plan a wheel alignment once the rear height is set, and check the rear shock length for the new ride height.

What’s included

Check the package contents against your installation before starting.

SKU: DAYKT09108BK Category:

Specification

Shipping weight 4.00 lbs
Package dimensions 6.00 × 6.00 × 6.00 in
brands

Questions & Answers

Is the Daystar KT09108BK a rear or front lift?

It is a rear lift. Its position is rear, the lift is 2.5 inches, and it is built for 32 inch tires.

Does this kit need an alignment?

Yes. Wheel alignment is needed once the rear height is set, so plan an alignment after installation. Verify the vehicle fit before ordering.

What tire size is this kit for?

It is built for 32 inch tires. Confirm tire diameter and clearance for your setup before ordering, since the kit is designed around that tire size.

Are the rear shocks worth checking after a rear lift?

Yes. A higher rear height can change shock travel, so check the mounting points and rubber bushings for wear. Replacing worn shocks at the same time keeps the rear ride even and avoids extra labor later.

What signs show the rear suspension needs attention?

Look for sagging at the rear, clunks over bumps, uneven tire wear and fluid on the shock body. Recheck the rear height and alignment if the truck pulls or the tires wear on one edge.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Daystar Lift Kits on Amazon