Select your vehicle

Daystar Comfort Ride 2.5 Inch Suspension Lift Kit with Add-A-Leafs – KT09104BK

Daystar

Shop Toyota Tundra Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 2.5-inch Comfort Ride suspension lift for 2000–2006 Toyota Tundra models
  • Front strut spacers and rear add-a-leafs
  • Bump stops, black shock boots and a hardware kit included

Description

Overview

The Daystar KT09104BK is a 2.5-inch Comfort Ride suspension lift for the 2000 to 2006 Toyota Tundra, sold under part number DAYKT09104BK. The kit adds front strut spacers and rear add-a-leafs, which are extra leaf springs bolted into the rear leaf pack to add height and load support. Daystar describes its Comfort Ride suspension kits as a way to increase vehicle height and improve performance, with better ground clearance and room for larger tires.

Bump stops, black shock boots and a hardware kit complete the package. The design uses most of the stock components, so the factory parts stay in use with the new spacers and leaves. The lift height is 2.5 inches. Confirm the tire size you plan to run fits with the lift before mounting.

Key features

  • 2.5-inch lift height
  • Front strut spacers
  • Rear add-a-leafs for height and load support
  • Bump stops included
  • Black shock boots
  • Hardware kit included

Living with add-a-leafs

Rear leaf springs carry most of the load on a Tundra, so adding leaves changes how the rear sits and rides. Extra leaves stiffen the rear slightly, which is why the rear ride will feel different from stock even when the rest of the suspension is unchanged. Loaded or towing trucks will feel this most, so it helps to think about typical cargo before setting expectations.

Because the front and rear are changed in different ways, the truck’s alignment and steering feel can shift. Check the front spacers, the bump stops and the shock boots after the first few weeks, since those parts are the most exposed to road debris. A lift this size also changes the angle of the driveline, so a look at the U-joints and pinion angle is worth doing during the same service.

  • Inspect leaf packs, U-bolts and bushings at regular service intervals
  • Check bump stops for cracking after rough trail use
  • Recheck alignment after the first road test

Specifications

Brand Daystar
Part number DAYKT09104BK
Lift height 2.5 inches
Front lift component Strut spacer
Rear lift component Add-a-leaf
Shock boots Black
Hardware Hardware kit included
Fitment type Direct fit

Vehicle fitment

It fits 2000 to 2006 Toyota Tundra models, covering the Base, Limited and SR5 versions.

Before ordering, match your Tundra’s year, model and trim against the years and versions covered.

Installation notes

Add-a-leafs change the rear spring stiffness and the load the rear suspension carries, so the rear ride will differ from stock. A 2.5-inch lift also changes driveline angles and suspension geometry, so check both, and recheck the alignment once the kit is installed.

What’s included

The kit includes front strut spacers, rear add-a-leafs, bump stops, black shock boots and a hardware kit.

SKU: DAYKT09104BK Categories: ,

Fitment

VehicleYearsTrims
Toyota Tundra2000–2006Base, Limited, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the KT09104BK fit a 2007 Toyota Tundra?

No. The kit fits 2000 through 2006 Toyota Tundra models only, so 2007 and later trucks are not included. Confirm your year and model before ordering a kit for a newer Tundra.

What are add-a-leafs?

Add-a-leafs are extra leaf springs that bolt into the rear leaf pack. In this kit they add height at the rear and support the load, which is why Daystar lists them as the rear lift component.

Are bump stops and a hardware kit included?

Yes. The kit includes bump stops, black shock boots and a hardware kit, along with the front strut spacers and rear add-a-leafs. Confirm the tire size you plan to run fits with the lift before mounting.

Can add-a-leafs be combined with other rear upgrades?

Often, but check the spring stiffness and load limits of any heavier rear parts first. Add-a-leafs change how the rear leaf pack flexes, so an extra shock or heavier bumper can change ride and handling.

How often should the leaf pack be inspected?

Inspect the leaf pack, U-bolts and bushings at every oil change or tire rotation. Look for cracked leaves, loose clamps and rear sagging, which can point to wear or overloading.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tundra Lift Kits on Amazon