Overview
The ARB 2 Inch Lift Kit (Light Duty), part number OMETAC04LKS, is an Old Man Emu coil spring kit with shocks included. It is built for light duty use and gives a lift height range of 0 to 2.25 inches.
It fits the 1998-2014 Toyota Tacoma, including the Base, Limited, Pre Runner, S-Runner, SR5 and X-Runner trims.
Key features
- Light duty lift kit
- Lift height range 0 to 2.25 inches
- Shocks included
- Leaf springs at the rear
- Direct fit for the listed Tacoma model years
Load and towing considerations
Leaf springs at the rear carry load differently from coil springs, so the rear end behaves noticeably differently with a full bed. Light duty kits are not built for heavy loads, and the rear suspension limits how much weight the truck should carry. Keep loads moderate and distribute weight evenly over the axle.
Tire size and wheel offset affect how the lifted truck handles and how much clearance the wheels have. Check clearance at full steering and full suspension travel. Bump stops help control the rear when the leaf springs compress, and they are often replaced along with the shocks.
After lifting, look at the leaf spring packs and their bolts for shifting or cracks. Retighten U-bolts after the first few drives and inspect the bushings for wear. Plan periodic checks rather than waiting for a noise.
- Check clearance at full steering lock
- Retighten U-bolts after early drives
- Inspect leaf spring bushings for wear
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMETAC04LKS |
| UPC | 700006402221 |
| Lift height range | 0 to 2.25 inches |
| Suspension type | Coil spring kit |
| Rear lift method | Leaf springs |
| Shocks | Included |
| Load setup | Light duty |
Vehicle fitment
Vehicle fit covers the 1998-2014 Tacoma in the Base, Limited, Pre Runner, S-Runner, SR5 and X-Runner trims.
Confirm your vehicle’s year, model and trim before ordering, especially for 2016 and later Tacoma models.
Installation notes
A lift with leaf springs at the rear changes the alignment and driveline angles, so have both checked after installation. Light duty kits are not set up for heavy bumpers or winches.
What’s included
Coil springs, leaf springs and shocks.







