Overview
The Daystar DAYPAPLS104, also sold as the PLS 104 Premium Lift System, is a 5-inch body-lift and leveling kit for 2003 to 2005 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. It covers Base, Hybrid, LS, LT, WT and Z71 Silverado trims and Base, Hybrid, SL, SLE, SLT and WT Sierra trims for the same model years.
The kit raises the truck 5 inches and allows tires up to 33 inches in diameter. Forged torsion bar keys handle the front lift, and high pressure fiberglass reinforced nylon blocks add height at the rear. Laser cut, powder coated bumper relocation brackets, a steering extension and extension brackets allow the bumper and steering to follow the raised body.
Key features
- 5-inch body-lift and leveling design
- Allows tires up to 33 inches in diameter
- Forged torsion bar keys
- Fiberglass reinforced nylon lift blocks
- Laser cut and powder coated bumper relocation brackets
- CNC machined and zinc plated steering extension
- Urethane Gap Guard wheel well extensions
Things to check before the install
A body-lift and leveling kit changes how the truck sits without altering the axles or frame, but the body is lifted off the frame, so brake lines, steering shaft and wiring all need room. Set the torsion bar keys first, then confirm front height before the body mount hardware is fully tightened. Expect the install to take longer than a simple spacer job, since the bumper and steering parts need careful alignment.
Older Silverado and Sierra trucks often have worn steering components, so this is a good time to inspect tie rods, pitman arm and ball joints. A raised body can make small problems more noticeable, such as wander or vibration at speed. Keep fasteners checked during the first few weeks of driving, and recheck the alignment if the front tires begin to wear unevenly.
Specifications
| Brand | Daystar |
|---|---|
| Part number | DAYPAPLS104 |
| Lift height | 5 inches |
| Maximum tire diameter | 33 inches |
| Bumper bracket thickness | 3/16 inch |
| Installation time | 9 to 10 hours |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits 2003 to 2005 Chevrolet Silverado 1500 and GMC Sierra 1500 pickups in the trims covered above.
The 2006 and later 1500 trucks and the 2500 and 3500 models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the torsion bar keys, then check the front height before the body-mount hardware is final. The steering extension changes steering geometry, so check alignment after installation. Installation takes 9 to 10 hours, which is longer than the 8 to 9 hours for 1995 to 1998 trucks.
What’s included
The kit includes forged torsion bar keys, high pressure fiberglass reinforced nylon lift blocks, laser cut and powder coated bumper relocation brackets, a steering extension, high strength hardware, extension brackets and urethane wheel well extensions.









