Overview
The Daystar KT09118BK is a 1.5 inch rear lift kit made of coil spring spacers, from the ComfortRide line. It is built around 32 inch tires.
ComfortRide kits lift without a large change to the rest of the suspension, and the rear coil spring spacers are finished in black.
Key features
- 1.5 inch rear lift
- Coil spring spacers
- Built for 32 inch tires
- Black finish
Tire size and spacers
Tire size is the main reason to choose a rear spacer kit. A larger tire changes rolling diameter, which affects speedometer reading, gearing feel and the load on the suspension, so the new setup should be considered as a whole. The rear coil spring spacers keep the factory springs in service while adding height, which many owners prefer for simplicity.
Clearance depends on the tire width and offset as well as the diameter. Rub most often shows up at full compression or when turning, so test the setup slowly before using it off road. Shocks and bump stops should be inspected for wear once the new height is set, since they carry more travel at a higher ride.
- Check tire clearance at full compression
- Test steering lock slowly after installation
- Inspect shocks and bump stops at service
Specifications
| Brand | Daystar |
|---|---|
| Part number | KT09118BK |
| UPC | 814423010924 |
| Lift | 1.5 inches |
| Position | Rear |
| Lift method | Coil spring spacers |
| Tire size | 32 inch |
| Color | Black |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering, and confirm that it takes the 32 inch tire size.
Installation notes
Wheel alignment is needed after installation, and the rear shocks should be checked at the new height.
What’s included
The kit covers the rear coil spring spacers. Confirm the hardware contents against your installation before starting.









