Overview
The Daystar PAJL200PA is a 1.75-inch coil spacer lift for the 2007–2016 Jeep Wrangler (JK). It raises the front about 1.75 inches and the rear about 1 inch, which allows the use of up to 33-inch diameter tires.
The kit uses urethane coil spring spacers and leaves the OEM suspension geometry and factory stability settings unchanged. The factory ride stays smooth, and the factory wheels can be used after installation. Installation takes about 1 to 2 hours, and detailed instructions are included.
Key features
- 1.75 inches of front lift
- About 1 inch of rear lift
- Allows up to 33-inch diameter tires
- Factory wheels can be used after installation
- Does not alter the OEM suspension geometry or stability parameters
- Maintains the factory smooth ride
Before you buy
Coil spacers raise the body by seating the factory springs on a spacer, so the spring carries its normal load at a higher position. This approach keeps the control arms, steering and shocks in place, which is why it suits owners who want a modest lift without a full suspension rebuild. The shocks, brake lines and sway bar links may still need a check after installation, because the geometry at the top of the spring changes slightly.
Before buying, consider how the tires and wheels will fit at the new height. Larger tires often lead to later upgrades such as bumper work, steering components or a brake line extension, so plan those as separate projects. Recheck the torque on all spacer hardware after the first few drives, and inspect the urethane spacers periodically for cracks, flattening or shifting.
- Check brake lines and the driveline angle after installation
- Re-torque spacer hardware after the first few drives
- Inspect the urethane spacers at each service interval
Specifications
| Brand | Daystar |
|---|---|
| Part number | PAJL200PA |
| UPC | 618089008574 |
| Lift height | 1.75 inches front, about 1 inch rear |
| Lift height range | 0 to 2.25 inches |
| Maximum tire diameter | 33 inches |
| Material | Polyurethane coil spring spacers |
| Installation time | Approximately 1 to 2 hours |
| Shocks included | No |
Vehicle fitment
It fits 2007–2016 Jeep Wrangler (JK) models.
Wrangler model years before 2007 or after 2016 are not covered, and the Wrangler JL is not included. Check fit against your vehicle’s year, model and trim before buying.
Installation notes
The kit includes everything needed for installation, and the job takes about 2 hours. The front lift is 1.75 inches and the rear is about 1 inch, so check the alignment once the spacers are in.
What’s included
Polyurethane coil spring spacers for the front and rear, all the parts needed for installation and detailed instructions.
Not included: Shocks.








