Overview
The Dana Spicer Pinion Oil Seal, part number 43085, is a seal for the pinion of a Dana 35 axle. A pinion seal sits where the pinion shaft exits the carrier, and it keeps gear oil inside while blocking dirt and water from getting in.
It is made for the Dana 35 pinion, and a pinion seal has to match a specific carrier. Compare it with the old seal before installing.
Signs of a leaking seal
A pinion seal keeps gear oil in the carrier where the pinion shaft exits. When it begins to fail, the usual sign is oil on the inside of the axle housing near the pinion, often seen after a drive or on the driveshaft yoke. Leaks left unchecked can run the carrier low on oil and damage the bearings.
Seal replacement is usually done with the pinion nut removed, so the seal and yoke are checked together. Clean the sealing surface on the yoke before fitting the new seal, and check the yoke for grooves that could cause a new leak. Refill with the correct gear oil and check the carrier after a short drive.
- Look for oil on the housing near the pinion
- Check the yoke sealing surface for grooves
- Refill and recheck for leaks after installation
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 43085 |
| UPC | 23913141462 |
| Application | Dana 35 pinion |
| Type | Pinion oil seal |
Vehicle fitment
The Dana 35 is an axle, so match the seal to your axle’s pinion before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace the pinion seal whenever the pinion nut is removed, since the seal lip is pressed into place. Use a proper seal driver to avoid damage, and check the carrier for leaks after installation.
What’s included
One pinion oil seal is named. Not included: gear oil and the pinion nut, which are separate items.









