Overview
The Dana Spicer 35916 is an axle oil seal retainer for the differential pinion seal area. It holds the pinion seal in place on the carrier so lubricant stays inside the housing.
It is a universal fit retainer, so it is not tied to one vehicle. Its drivetrain parts are precision engineered and put through rigorous testing to the standards used for OE manufacturers.
Key features
- Dana Spicer part number 35916
- Retains the pinion seal at the carrier
- Universal fit designation from the brand
- Brand reports rigorous testing of its drivetrain parts
Sealing the pinion area
The retainer is part of the pinion seal assembly. It holds the seal squarely in the carrier bore, so the seal lip can maintain contact with the pinion yoke or flange as the shaft turns. A seal that moves or sits off square can allow gear oil to leak past it, and this is one of the more common sources of leaks around the front of a differential.
When replacing a retainer, check the bore for scoring or corrosion, since a damaged bore can prevent a new seal from seating. Seals and retainers are often replaced together, and the pinion yoke surface should be inspected for grooves where the seal lip rides. Keep the fill level correct after the work, and check for seepage after the first few drives.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 35916 |
| UPC | 23913138998 |
| Part type | Axle oil seal retainer |
| Fitment | Universal fit |
Vehicle fitment
The retainer is universal fit, so it is not vehicle-specific. Carriers differ, so match the part number to your differential before installing.
No vehicle years, models or trims are named for this retainer. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion seal work usually involves draining the differential fluid and checking pinion preload afterward, so a qualified technician is the safer choice.
What’s included
Only the retainer is described. No pinion seal, bolts or fluid are named as included.









