Select your vehicle

Dana Spicer Pinion Nut – 44189

Dana Spicer

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana Spicer pinion nut, part number 44189, for AMC Model 20 and Dana 35 axles
  • Thread size 7/8-20, hex size 1.125, thickness 0.730
  • Self-locking flanged nut, so no separate pinion nut washer is needed
  • No vehicle model or model years are stated

Description

Overview

The Dana Spicer 44189 is a self-locking pinion nut for AMC Model 20 and Dana 35 axles. It is a flanged nut, so it seats on the pinion without a separate pinion nut washer. It is an OE replacement part.

Use it to replace a worn or lost pinion nut on a matching AMC Model 20 or Dana 35 axle. Confirm the axle type on your vehicle before ordering.

Key features

  • Self-locking flanged design
  • No separate pinion nut washer required
  • Genuine OE replacement part.
  • 7/8-20 thread with a 1.125 hex size

Before you buy

A pinion nut holds the pinion yoke against the pinion bearing preload, so it has to be tightened to a specified torque rather than just snugged down. Self-locking nuts resist loosening under road vibration, but they are still fasteners that should be checked during service. Replacing the nut is common whenever the pinion is removed, because the threads can stretch and the locking feature can wear after one use.

When choosing a replacement, match the thread, hex and axle type before anything else. Inspect the pinion yoke bore and splines for wear, since a loose yoke can make a new nut appear to fail. Flanged nuts skip the separate washer step, which keeps the assembly sequence simple, but an old washer should not be reused in its place.

  • Check the yoke splines for wear before installing
  • Replace the nut whenever the pinion is removed
  • Recheck pinion preload after the first drive

Specifications

Brand Dana Spicer
Part number 44189
UPC 70000070000
Thread size 7/8-20
Hex size 1.125
Thickness 0.730
Nut type Self-locking flanged nut
Axle applications AMC Model 20, Dana 35

Vehicle fitment

It is made for AMC Model 20 and Dana 35 axles, which are axle types rather than vehicles. Confirm the axle type against your vehicle before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because this is a flanged nut, install it without a separate pinion nut washer. Pinion preload should be set by a qualified axle technician.

What’s included

Check the package contents against your installation before starting.

Specification

Shipping weight 1.00 lbs
Package dimensions 6.00 × 6.00 × 4.00 in
brands

Questions & Answers

Will the Dana Spicer 44189 fit a Jeep Wrangler?

No Jeep model or model years are stated. The nut is named for AMC Model 20 and Dana 35 axles only, so confirm the axle type on your vehicle before ordering.

Will I need a pinion nut washer?

No. This is a flanged nut, so a separate pinion nut washer is not needed. The nut is also self-locking and is an OE replacement part.

What thread size and hex size does the 44189 pinion nut have?

It has a 7/8-20 thread, a 1.125 hex size and a thickness of 0.730. Measure your old nut and compare the thickness before installing.

Should I reuse the old pinion nut?

Generally no. Pinion nuts are usually replaced when the pinion is disassembled, since the threads and locking feature can be damaged by tightening. Inspect the yoke and threads before installing the new nut.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon