Overview
The G2 Axle and Gear 14-PN9 is a differential pinion nut that retains the drive yoke on the pinion shaft. It carries its own part number and sits within the brand’s pinion nut range. Compare thread details against your axle before use.
Choosing a replacement nut
When replacing a pinion nut, thread pitch and nut style matter more than the outer size. A nut that threads on by hand but does not seat fully can cause the flange to sit off square. Compare the new nut with the old one before fitting it, and do not force a mismatched thread.
A pinion nut is usually removed once during a yoke or flange replacement, so the threads and the sealing surface are often inspected at the same time. If the flange or yoke is replaced, a fresh nut is a sensible part of the job. Keep the old nut for comparison if the thread condition is in doubt.
- Match thread pitch before tightening
- Inspect the flange seating surface
- Replace a nut with rough or damaged threads
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 14-PN9 |
| UPC | 682034178926 |
| Product type | Differential pinion shaft nut |
Vehicle fitment
Verify thread and axle details against your differential before installation.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The item is the pinion nut, nothing more.








