Overview
The G2 Axle and Gear 14-PN3 is a pinion nut, the threaded fastener that holds a differential pinion shaft in position. It is offered in G2’s differential pinion shaft nut category, and the part number 14-PN3 identifies this item. Beyond the title, identifiers and category, the available details are limited, so the sections below cover only what is known.
Choosing a pinion nut
The pinion nut holds the yoke or flange against the pinion shaft and sets the clamp that keeps bearing preload stable. Because it carries load in both directions, a nut that is loose, stretched or damaged can let the pinion move under driving forces and change the gear setup.
When choosing a replacement, match the thread and the nut style to the pinion shaft rather than to the nut’s name alone. Use a torque wrench set to the value in your service procedure, and do not rely on feel. Pinion nuts are often replaced whenever the pinion is disassembled.
- Confirm the thread matches the pinion shaft before ordering
- Use a calibrated torque wrench for final tightening
- Replace the nut if it has been tightened before
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 14-PN3 |
| UPC | 682034178827 |
| Product type | Differential pinion shaft nut |
Vehicle fitment
No vehicle, axle model or year is named for this nut. Confirm thread size and axle compatibility before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The pinion nut is the only item included, so compare it against your installation before starting.








