Overview
The G2 Axle and Gear 14-PN7 is a differential pinion nut that clamps the drive flange or yoke onto the pinion shaft. Its UPC is 682034178872. Confirm the thread size against your pinion before installing.
Torque and retention
A pinion nut holds the drive flange or yoke against the pinion shaft and sets the preload that keeps the pinion bearings seated. Its tightening value matters as much as its fit, so use the torque figure from your service procedure rather than tightening by feel. Over-tightening can crush the bearing spacer, while under-tightening lets the flange move under load.
Inspect the threads on the pinion shaft before installing a new nut. Damaged threads can strip under load and let the flange loosen, which causes vibration. Keep the flange surface clean and free of debris so the nut seats evenly.
- Check the pinion shaft threads for damage
- Use a new nut when the procedure calls for one
- Tighten to the value in your service procedure
- Confirm the flange sits flush before torquing
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 14-PN7 |
| UPC | 682034178872 |
| Product type | Differential pinion shaft nut |
Vehicle fitment
Confirm fit for your axle and vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The item is the nut only, so check the package contents against your installation first.








