Select your vehicle
-13%

Dana Spicer Axle Disconnect Actuator O-Ring – 620980

Dana Spicer

Shop Dana Spicer Differential Parts on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana Spicer 620980 O-ring for an axle disconnect actuator
  • Made for the Dana 30 Reverse axle type
  • Universal fit by axle, with no vehicle years or models listed
  • O.E.M. replacement part, UPC 70000007874

Description

Overview

The Dana Spicer 620980 is an O-ring for an axle disconnect actuator, sold as an O.E.M. replacement for a Dana 30 Reverse axle. It is meant for owners who want to replace or recondition a disconnect system that has stopped working properly.

Dana Spicer marks this O-ring as universal fit by axle type. It is not tied to a specific vehicle model, so match the Dana 30 Reverse axle type to your axle before fitting it.

Key features

  • Original equipment manufacturer part from Dana Spicer
  • O-ring for the axle disconnect actuator
  • Made for the Dana 30 Reverse axle type.
  • Part number 620980 for matching during a rebuild

Disconnect actuator seal wear

A disconnect actuator uses seals to hold lubricant and keep the shift mechanism working. Over time, rubber O-rings harden, flatten and lose their grip, which can let fluid seep past. Seal failure is often first noticed as a light film of fluid around the actuator body. When the actuator is opened for service, the O-ring is normally replaced along with other seals in that assembly, since an aged ring can leak again soon after the rebuild.

Before fitting a replacement, clean the groove and inspect it for nicks that could cut a new ring. Lubricate the O-ring lightly with the fluid used in the axle so it seats without pinching. While the actuator is apart, check the disconnect hub and shift fork for wear, because a worn component can damage a fresh seal. Keep the old ring for comparison if the fit is in doubt.

Specifications

Brand Dana Spicer
Part number 620980
UPC 70000007874
Component O-ring for axle disconnect actuator
Axle type Dana 30 Reverse
Fitment listed Universal fit

Vehicle fitment

This O-ring is not vehicle-specific. It is universal fit for the Dana 30 Reverse axle type, with no vehicle years or models named, so check the axle type before fitting it.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One O-ring for the axle disconnect actuator, part number 620980. Confirm how many you need before fitting.

SKU: D/S620980 Category:

Specification

Shipping weight 0.01 lbs
Package dimensions 0.50 × 0.50 × 0.10 in
brands

Questions & Answers

What is Dana Spicer part number 620980?

It is an O-ring for an axle disconnect actuator, sold as an O.E.M. replacement part. It is made for the Dana 30 Reverse axle type, so match that axle type before fitting.

Will this O-ring fit my vehicle by year and model?

No vehicle years or models apply to this part, since it is universal fit by axle type. Dana 30 Reverse is the axle type to match, so confirm your axle before you fit it.

How many O-rings are included?

Confirm how many O-rings you need for part number 620980 before fitting it to the actuator. Your rebuild instructions will show the count for your axle.

How can I tell if the actuator O-ring needs replacing?

Look for fluid seeping around the actuator body or a disconnect that sticks or does not engage smoothly. Those signs point to a worn seal, so inspect the O-ring during any rebuild.

Should the O-ring be lubricated before installation?

Yes, a light coat of the axle's own fluid helps the ring seat without twisting. Avoid heavy grease, which can swell some seal materials and leave residue inside the housing.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dana Spicer Differential Parts on Amazon