Overview
The Dana Spicer 32121 is a differential side gear thrust washer, part number 32121, with a required quantity of 2. Thrust washers like this one sit between the side gears and the differential case and control end play as the gears turn.
If a side gear set is supplied, these washers come with it, so a separate washer is unnecessary. Use this part on its own only when rebuilding a differential without that set.
Key features
- Side gear thrust washer for Dana Spicer differentials
- Required quantity of 2 per differential
- Included with the Dana Spicer side gear set
- Listed by Dana Spicer as universal fit
Setting side gear end play
Side gear thrust washers take the thrust load between the side gears and the differential case, so their thickness and face condition directly control end play. Measure the gear clearance during assembly and keep both washers the same thickness so the side gears seat evenly. A washer that is too thin lets the gear move under load, while one that is too thick can bind the gear and cause early wear.
Start with clean, undamaged faces on the case and the gears. Light scoring on the washer faces is a common sign that lubrication was poor or that debris got in during the last build. Coat the washers with gear oil or assembly lube before fitting, and turn the side gears by hand to confirm they rotate freely before closing the housing.
- Replace both washers together when one shows wear
- Check the case thrust surfaces for grooves before reusing them
- Keep the washers flat and free of debris during installation
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 32121 |
| UPC | 70000006928 |
| Part type | Differential side gear thrust washer |
| Quantity required | 2 |
Vehicle fitment
No vehicle years, models or axle names are given for this washer, only a universal fit designation. Check the washer against the side gears and differential case before installing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two thrust washers, the required quantity of 2 per differential.
Not included: the side gears and differential case, which the washers sit between.









