Overview
The ARB RD116 is an air locking differential for Dana 44 axles, with 30 splines and a 3.92 ratio up. It is a selectable locker that fits either the front or rear axle position.
The air locker uses compressed air to lock both axles, turning an open differential into a full spool that supplies power to both wheels. An ARB onboard air compressor is needed to activate it.
Key features
- Pneumatic selectable locker
- Converts an open differential to a full spool when engaged
- Dana 44 axle type
- 30 spline axle spline count
- Front or rear axle position
Setting up the locker
Setup starts with the gears. A locker only performs when the ring and pinion are set correctly, and the locker’s housing must match the axle it goes into. A gear shop usually handles the install, setting mesh and preload and checking that the carrier fits the axle housing without binding.
The air system is the other half of the job. Route the air line away from the exhaust, suspension travel and sharp edges, and use a switch that is easy to reach from the driver’s seat. After the first few drives, check each fitting for leaks, confirm the locker engages and releases fully, and listen for unusual noise from the axle. Rough engagement or a slow release is a sign to recheck the air supply and connections before continuing.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD116 |
| UPC | 88134800677 |
| Axle type | Dana 44 |
| Axle spline | 30 splines |
| Ratio | 3.92 ratio up |
| Differential type | Selectable locker, air operated |
| Axle location | Front or rear |
Vehicle fitment
This is a Dana 44 axle part. Check the spline count, ratio and axle location against your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the gear set must be matched to the locker, have a gear shop fit the unit and set the gear mesh and preload.
What’s included
The air locking differential unit.
Not included: the ARB onboard air compressor.










