Overview
The Dana Spicer 706207X is a closed knuckle wiper seal kit for front Dana 25, Dana 27 and Dana 44 axles. Dana Spicer describes these closed knuckle and king pin parts as difficult to find and now available directly.
The kit covers the closed knuckle and king pin area of the front axle, so match the kit to your axle type before ordering.
Key features
- Dana Spicer part number 706207X
- Front axle location
- Dana 25, Dana 27 and Dana 44 axle types
- Closed knuckle and king pin seal kit
Working near the steering knuckle
The closed knuckle area holds lubricant around the king pins and keeps dirt and water out of the steering joint. A worn seal lets grease escape and lets grit reach the bearings, which speeds up play in the knuckle. Common signs include grease on the inside of the wheel, a dry or cracked seal edge, and a steering wheel that feels loose near center.
Closed knuckle work is different from a basic hub job. Removing the knuckle affects brake and steering components, so take care with hoses and fasteners. King pin bushings and thrust bearings often wear at the same time as the seals, so check them for play while the knuckle is apart. Replacing the seals as a set keeps the knuckle sealed evenly and avoids a second teardown soon after.
- Look for grease on the inside of the wheel
- Check king pin play before disassembly
- Replace the kit’s seals as a set
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706207X |
| Kit type | Closed knuckle wiper seal kit |
| Axle location | Front |
| Axle types | Dana 25, Dana 27, Dana 44 |
Vehicle fitment
It is for front Dana 25, Dana 27 and Dana 44 axles. Confirm your front axle type before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Closed knuckle service means working on the front steering knuckle, which should be handled by a technician familiar with front axle work.
What’s included
Check the package contents against your installation before starting.









