Overview
The Power Trax Ford 8.8 Inch 28 Spline .750 Cross Pin Open Case No-Slip, part number 9206882807, is a No-Slip traction unit for Ford 8.8-inch axles with 28 splines. It combines the smooth operation of a limited slip with the traction performance of a locking differential.
A precise synchronization mechanism is designed to avoid the ratcheting sounds common to other locking differentials. Installation needs no ring and pinion setup, and no special tools or oils are needed. The unit fits front or rear axle positions and covers both Ford 8.8-inch and Mazda 8.8-inch axle types.
Key features
- Combines limited slip smoothness with locking traction
- Precise synchronization that avoids ratcheting noise
- No ring and pinion setup needed for installation
- No special tools or oils required.
- 28 spline axle
- Open case design with a .750 cross pin
Locker or no-slip?
A no-slip style unit sits between a standard open differential and a fully locked one. It behaves like a limited slip in normal driving, then locks the axle when traction is lost. That makes it useful on mixed terrain, where a driver wants quiet street manners but dependable grip on loose surfaces. Ask what kind of driving the vehicle sees most before deciding how much locking is needed.
Because this unit needs no ring and pinion setup for installation, the swap is less involved than many differential work. Still, the rear axle should be inspected at the same time. Worn axle bearings, tired seals or a loose cover can make a new locker feel rough, so address those items while the axle is open.
- Confirm the axle is a Ford 8.8-inch or Mazda 8.8-inch
- Inspect bearings and seals during the swap
- Check the cover fasteners after the first trail runs
Specifications
| Brand | Power Trax |
|---|---|
| Part number | PTX9206882807 |
| Popular axle manufacturer | Ford |
| Axle location | Front or rear |
| Axle type | Mazda 8.8 inch or Ford 8.8 inch |
| Axle spline | 28 splines |
| Cross pin | .750 |
| Case | Open case |
| Differential type | Automatic locker (No-Slip) |
Vehicle fitment
It fits the 1990 to 1997 Ford Aerostar, the 1985 to 2011 Ford Ranger in many trims, and the 1994 to 2009 Mazda B4000 in several trims. Check your year, model and trim before ordering.
Both the Ford and Mazda 8.8 inch axle types are named, and the Ranger entry spans 1985 to 2011. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The No-Slip unit is the item supplied. Check the parts against your installation before starting.










