Overview
The RE1887-220 is a CVF style rear drive shaft, 22 inches long, with a 1310 U-joint. It is a universal fit.
Driveshaft length and yoke type decide whether a shaft fits a driveline. Measure your driveline and confirm the length and yoke before ordering.
Measuring for a driveshaft
A driveshaft carries torque from the transmission or transfer case to the axle, and its length and yokes must match the driveline it sits in. Measure from the center of one U-joint to the center of the other, then compare that length with the existing shaft before cutting or swapping anything.
The U-joint and yoke type are as important as length. A mismatch can cause binding, vibration or early joint wear. Check the flange or slip yoke condition, and inspect the U-joint caps for play. After installation, have the shaft balanced if vibration appears at speed, and recheck the joint angles after any lift or axle change.
- Measure center to center of the U-joints
- Confirm the yoke type matches the transfer case
- Inspect U-joint caps for play before installing
- Check for vibration at speed after installation
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1887-220 |
| UPC | 614901147254 |
| Style | CVF |
| Position | Rear |
| U-joint | 1310 |
| Length | 22 inches |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit and is not tied to one vehicle. A driveshaft must match the length and yoke of the driveline it goes into.
Confirm your vehicle’s year, model and trim before ordering, and check the length against your driveline.

