Overview
The CRT56217 is a 4-flat powered converter wiring T-connector for the 2008–2019 Toyota Highlander. It fits the Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid XLE, LE, LE Plus, Limited, Plus, SE, Sport and XLE trims. It is a 3-wire system that plugs into the factory harness, with an install time of 30 minutes.
Key features
- 4-flat connector style
- Powered converter type
- 3-wire system
- Plugs into the factory harness
- Install time listed at 30 minutes
Highlander wiring and trailer use
Four-flat trailer connections are common on mid-size SUVs, and a powered converter helps match the vehicle’s signals to the trailer’s lighting and brake needs. A 3-wire system keeps ground, signal and power feed in one compact housing. Knowing which function each wire carries makes troubleshooting far simpler when a light stops working.
Harness connectors can harden or corrode after years of heat and road salt, so inspect the pins and housing before reconnecting. Replace a cracked boot or damaged pin rather than forcing a mate. Trailer setups often also involve a hitch and mirrors, so review the full towing setup together before the first trip.
- Inspect pins for green corrosion
- Keep the dust cap on when unused
- Re-seat the ground screw after a few months
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT56217 |
| Connector style | 4-flat |
| Type | Powered converter |
| Wiring system | 3-wire |
| Install time | 30 min |
| Included | 4-pin connector, dust cap, ground wire with self-tapping screw |
Vehicle fitment
It fits the 2008–2019 Toyota Highlander in the Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid XLE, LE, LE Plus, Limited, Plus, SE, Sport and XLE trims.
Highlander model years outside 2008–2019 are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Curt gives a 30 minute install time. The connector mates with the harness, then the ground wire is fastened with its self-tapping screw.
What’s included
Supplied parts are a 4-pin connector, a dust cap and a ground wire with a self-tapping screw.









