Overview
The Curt Manufacturing 56109 is a standard 2-wire wiring T-connector for the 2010 and 2012–2018 Dodge Journey, part number CRT56109. Tail lights, brake lights and turn signals hook up to its 4-way flat socket with no wire splicing.
It plugs into the tail light assembly and includes a dust cover. It fits Journey models in several trim levels, from Base and SE through R/T and Crossroad.
Key features
- Standard 2-wire system
- Plugs into the tail light assembly
- 4-way flat socket for tail lights, brake lights and turn signals
- Dust cover included
- Limited one-year warranty, made in USA
Connector care and wiring checks
Tail light connectors live in a damp, dirty spot under the rear of the vehicle, so they need periodic checks. Road salt, spray and temperature swings can corrode contacts and loosen plugs over time. A quick look before each trip catches many problems before they affect the trailer’s lights.
Disconnect the trailer and check the socket when a light stops working. Look for bent pins, green residue on the metal, melted plastic or a loose fit. Clean the contacts with a suitable contact cleaner, let them dry fully, and reconnect only once the socket is dry.
The dust cover matters more than many owners expect. Fit it whenever the socket is not in use, since it keeps water and grit out of the contacts. If the cover is cracked or missing, replace it so the connection stays protected.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT56109 |
| Wiring system | Standard 2-wire |
| Socket | 4-way flat |
| Install time | 15 min |
| Included | Dust cover |
| Warranty | Limited one-year |
| Made in | USA |
Vehicle fitment
It fits the 2010 and 2012–2018 Dodge Journey in AVP, Base, Crew, Crossroad, GT, Limited, R/T, SE and SXT trims. The 2011 model year is not covered by this connector.
The Dodge Durango and Dodge Grand Caravan are not covered by this connector. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install time is 15 min. Disconnect power to the tail light circuit before working on it.
What’s included
A dust cover for the socket, used when the connector is not in use.









