Overview
The Curt Manufacturing Wiring T-Connectors, part number CRT56040, plug directly into a factory wiring harness. It includes a 4 pin connector, a dust cap and a ground wire with a self tapping screw.
Key features
- Plugs directly into the factory harness
- Includes a 4 pin connector
- Includes a dust cap
- Includes a ground wire with self tapping screw
Tapping into factory wiring
A T-connector set lets an accessory circuit branch from existing vehicle wiring without cutting the factory harness. The connection depends on the harness plugging in correctly, so match the connector style to the harness before you start. Mismatched connectors can look like they fit but leave pins unseated.
Work on the wiring with the vehicle off and the battery disconnected. Crimped or pressed connections need to seat fully, and any wire you tap should be checked for damage to insulation. Use the self tapping screw on bare metal only, and clean away paint or rust first so the ground is reliable.
Check the connections after a few days of normal use and again after any rough driving. Loose terminals and worn insulation are the usual signs that a tap needs attention, and both are easier to fix early.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT56040 |
| Connector | 4 pin |
| Included | Dust cap; ground wire with self tapping screw |
Vehicle fitment
No vehicle is named for these T-connectors, and Curt marks them universal fit. Their use depends on a factory harness that they plug into.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fasten the ground wire with the included self tapping screw.
What’s included
A 4 pin connector, dust cap and ground wire with self tapping screw are included.
Not included: the factory harness that the connectors plug into.









