Select your vehicle

Curt Manufacturing Wiring T-Connectors – 56120

Curt Manufacturing

$70.28In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 7:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Curt Manufacturing 56120 standard 2-wire wiring T-connector, CRT56120
  • Fits 2011–2014 Ford Edge in Limited, SE, SEL and Sport trims
  • Plugs directly into factory harness; 4-pin connector included
  • Install time 45 min

Description

Overview

The Curt Manufacturing 56120 is a standard 2-wire wiring T-connector for the 2011–2014 Ford Edge, part number CRT56120. It plugs directly into the factory harness and adds a 4-pin connector to the vehicle wiring.

The kit includes a dust cap and a ground wire with a self-tapping screw, and the install time is 45 min.

Key features

  • Standard 2-wire system
  • Plugs directly into the factory harness
  • 4-pin connector included
  • Dust cap keeps the connector covered
  • Install time listed at 45 min

Before you start the install

Set aside enough time to work without rushing, since the trim pieces around the lamp area can be brittle and are easy to crack. Use plastic trim tools rather than screwdrivers, and keep track of each fastener so it goes back to its original spot. Lay the new T-connector and the factory harness plug side by side before cutting into anything, so you can confirm the layout matches. Good lighting and a clean work area make it easier to see the latch on the plug.

Plan to test before you reassemble. With the connector seated, have a helper cycle the brake, turn and tail functions while you watch the lamp. A missing function found at this stage is far easier to correct than one discovered after the trim is back in place. Keep the ground wire clear of hot exhaust components and moving parts, and route it so it cannot rub against sharp edges.

Specifications

Brand Curt Manufacturing
Part number CRT56120
Wiring system Standard 2-wire
Connector 4-pin
Install time 45 min
Included Dust cap, ground wire with self-tapping screw

Vehicle fitment

It fits the 2011–2014 Ford Edge in Limited, SE, SEL and Sport trims.

For a Ford Explorer, a Ford Escape, or a newer Edge model year, verify year, model and trim against your vehicle before buying.

Installation notes

The ground wire uses a self-tapping screw, so it needs a bare metal mounting point. The install time is 45 min.

What’s included

The 4-pin connector, dust cap and self-tapping ground wire come in the kit.

Fitment

VehicleYearsTrims
Ford Edge2011–2014Limited, SE, SEL, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 56120 fit a 2015 Ford Edge?

Verify the model year first. The T-connector is made for the 2011 through 2014 Ford Edge in Limited, SE, SEL and Sport trims.

What wiring system does the 56120 use?

It is a standard 2-wire system, not a powered 3-wire converter. It plugs directly into the factory harness, and the install time is 45 min.

Which Ford Edge trims are covered?

The covered trims are Limited, SE, SEL and Sport. For any other trim, check the trim on your registration or window sticker before choosing this T-connector.

Should I test the lights before reattaching trim?

Yes. Connect the battery only once the work is ready, then cycle the brake, turn and tail functions. Testing before the trim goes back on makes it easier to reach the connector if a function is missing.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon