Overview
The Currie CE-9807FTBK is a front track bar relocation kit for 2007–2018 Jeep Wrangler JK models, in both 2-door and 4-door bodies. It comes from Currie’s RockJock JK off road suspension system and moves the front track bar to a relocated mounting point.
The kit includes an inner bracket, an outer bracket and all hardware. Minor welding is required, and detailed instructions are included. It fits Rubicon, Sahara, Sport and Unlimited versions of the JK, among others.
Key features
- Inner and outer bracket for front track bar relocation
- All hardware included with the kit
- Designed for the RockJock JK off road suspension system
- Direct fit for 2-door and 4-door Wrangler JK models
- Detailed installation instructions included
Welding and fit-up
A relocation kit moves the track bar’s mounting point, which changes the bar’s angle and how the axle locates under load. Kits built around a full suspension system usually assume the inner and outer brackets are set at specific positions, so careful fit-up before welding matters. Tack the parts in place, check the track bar at full travel, and only then complete the welds.
Because the kit includes an inner and outer bracket, check that both sit square to the frame and axle before welding. Plan on re-checking alignment after the job is finished. If the vehicle is used on steep trails, inspect the welds after each outing for the first few weeks.
- Clean paint and rust from the weld areas before fitting
- Check bracket clearance at full steering lock
- Recheck front alignment after installation
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9807FTBK |
| UPC | 70000461546 |
| Position | Front |
| Type | Axle side |
| Fitment | Direct fit |
| Components | Inner bracket, outer bracket, all hardware |
| Installation | Minor welding required |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler (JK), including Unlimited and Rubicon versions. It is for the JK generation only.
It does not cover the Wrangler TJ, LJ or JL generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Minor welding is required, so this kit is not a bolt-on install. Follow the detailed instructions included with the kit. Weld only with proper equipment and training.
What’s included
The kit includes the inner bracket, the outer bracket and all hardware. Not included: the welding equipment needed to complete the minor welding.











