Overview
The Skyjacker Track Bar Relocation Bracket JKFTB is a front, axle-side bracket, part number JKFTB, for the 2007–2018 Jeep Wrangler (JK). It is black powdercoated and is used to keep a lifted axle centered and the wheels tracking straight.
Skyjacker has built suspension systems and accessories for 35 years. This bracket is a direct fit for the 2007–2018 Jeep Wrangler JK.
Key features
- Front position with axle-side mounting type
- Black powdercoated finish
- Fits 2007–2018 Jeep Wrangler JK models, including Unlimited models.
- Direct fit.
Before you buy
A track bar relocation bracket moves the axle end of the track bar so the bar sits closer to level once the suspension is lifted. On a lifted Wrangler, a stock track bar can angle enough to push the axle off center and pull the steering. Relocating that mount at the axle side reduces the angle, but the result depends on the bushings, bar ends and the rest of the steering geometry being sound.
Before fitting the bracket, inspect the track bar bushings, the bar ends and the mounts at both the axle and frame. Worn parts can make a new bracket feel loose. After installation, expect the front alignment to need adjustment, and recheck the bracket bolts after the first few trail runs.
- Inspect track bar bushings and ends for play
- Check axle and frame mounts for cracks or bent tabs
- Confirm steering and driveline clearance after the change
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JKFTB |
| UPC | 803696191850 |
| Position | Front |
| Type | Axle side |
| Finish | Black powdercoated |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), including Unlimited models, in the trims covered here. This bracket is for the JK generation only.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Axle-side brackets bolt to the axle, so check the mounting points against your axle before fitting. After relocating the track bar, have the front alignment checked.
What’s included
The package is the bracket itself. Check the hardware needed for your axle before starting, and confirm the mounting points first.








