Overview
The Currie CE-9807PA is a dropped pitman arm with a 4 inch drop, made for power steering on the 2007-2014 Jeep Wrangler (JK), in 2-door and 4-door models. It is the dropped pitman arm used in Currie’s RockJock JK off road suspension system.
A dropped arm moves the drag link attachment point lower, which corrects steering geometry once a JK has been lifted. The arm comes as one piece, so one arm is supplied.
It is designed for the 2007-2014 JK, so confirm the match with your lift before installing it on a non-RockJock setup.
JK owners lifting 2007-2014 Wranglers often need a drop arm, and this one is made to match Currie’s own system.
JK owners will find the arm paired with Currie’s other RockJock parts, which are designed to work together as a system.
The 4 inch figure is Currie’s stated amount of drop.
Key features
- Dropped pitman arm, 4 inch drop
- Corrects steering geometry
- Part of the RockJock JK system
- For 2-door and 4-door models
- Power steering
- One arm per package
Steering geometry after a lift
Lifting a Wrangler changes the angle of the drag link, and with it the steering geometry. Without a correction, the steering can feel loose, the wheels can wander and the drag link can bind at full lock. A dropped pitman arm lowers the drag link attachment so the link runs closer to level, which is the main reason it is fitted with a lift.
A dropped arm works alongside other steering parts, so the track bar, drag link and tie rod ends should be checked together. Worn ends can take up the slack that a correct arm is meant to remove, and the alignment will not hold. Inspect the ball joints and bushings for play before fitting the new arm.
Power steering systems put more load on the pitman arm and the steering box shaft than manual systems do, so a tight fit and a secure nut matter. Check the bolts and fasteners after the first few drives, and recheck alignment after any steering change.
- Inspect tie rod ends and drag link joints
- Check the track bar for play
- Recheck alignment after fitting
- Confirm the steering box shaft is free of damage
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9807PA |
| UPC | 70000463024 |
| Product type | Dropped pitman arm |
| Amount of drop | 4 inches |
| Steering type | Power steering |
| Body styles | 2-door and 4-door |
| Quantity | One arm |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Currie CE-9807PA includes: 2007–2014 Jeep Wrangler (JK) (70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X).
The 2007-2014 Jeep Wrangler (JK) is covered. The 2015-2018 JK years and the TJ, LJ and JL Wranglers are not covered. Compare your vehicle’s year, model and trim before ordering.
Installation notes
Take the drag link off the old arm, then use a puller on the steering box shaft. After fitting the dropped arm, have steering geometry and alignment checked, because the drag link now sits lower.
What’s included
- One dropped pitman arm, part number CE-9807PA












