Overview
The Jeep J3200501 is a factory style pitman arm nut for the 2007–2016 Jeep Wrangler (JK), in both 2-door and 4-door models.
The nut threads onto the steering box shaft and holds the pitman arm on. It is a plain replacement part rather than a lift component, so it has no drop and does not change steering geometry. It is a direct fit.
The washer is a separate item, so a repair that disturbs the pitman arm may need both parts. Confirm the steering type of your vehicle before ordering, as this nut is for manual steering.
For Wrangler owners the nut is a maintenance item. When a pitman arm is removed during a steering or lift project, the nut and its washer are the fasteners that hold the joint together, and replacing them with factory style parts keeps the assembly as Jeep designed it.
Key features
- Factory style replacement part
- Holds the pitman arm on
- Direct fit
- Stock replacement with no drop
- Covers 2-door and 4-door Wrangler JK models
- It is for 2007–2016 model years.
Steering joints and fasteners
The pitman arm is the link between the steering box and the drag link, so the nut that holds it on carries steering loads on every turn. A loose or worn nut can allow the arm to move on the shaft, causing play, wander or clunks, and the joint should be checked whenever the steering feels loose.
Replacing the pitman arm nut is normally part of a larger steering or suspension job, so inspect the drag link, tie rod ends and steering box for play at the same time. Use new fasteners rather than reusing worn ones, and keep the shaft splines clean and undamaged so the arm seats correctly.
- Inspect the shaft splines for wear
- Replace the washer with the nut when the arm is disturbed
- Check steering play after the first short drives
- Recheck torque after initial driving
Specifications
| Brand | Jeep |
|---|---|
| Part number | J3200501 |
| UPC | 70000521231 |
| Product type | Pitman arm nut |
| Amount of drop | Stock replacement |
| Fit type | Direct fit |
| Steering type in specifications | |
| Vehicle coverage | Jeep Wrangler JK, 2007–2016 |
Vehicle fitment
It fits the 2007–2016 Wrangler (JK), including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and the Unlimited versions of those trims.
- 2007–2016 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X)
Only the 2007–2016 Wrangler (JK) is named. The 2017–2018 JK and the Wrangler JL are not on this part number’s list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tighten the nut to the factory torque value for the pitman arm, and have the steering checked by a qualified technician after installation.
What’s included
The J3200501 is the pitman arm nut only.
Not included: the pitman arm washer, which is a separate part.









