Overview
The Crown Automotive 639115 is a pitman arm nut for early Jeep and Willys vehicles, including the CJ3, CJ5, CJ6, FC150, FC170 and the Willys CJ-2, CJ-3, CJ-5, CJ-6 and MB.
A pitman arm nut is the large fastener that holds the arm onto the steering box shaft, which is why it matters for safe steering. Crown’s data for this nut also shows an amount of drop of stock replacement and manual steering, which describe the arm family it belongs with rather than the nut itself.
No thread size, torque figure or material is given, so owners should match the nut to the shaft on their steering box.
Early Jeeps and Willys used a nut on a splined shaft, and the nut is a common lost or stripped part on restorations. The list reaches from the 1941 Willys MB to 1971 CJ models.
Because the nut is shared across so many early models, it is a common spares item for restorers. Crown lists direct fit for all ten model entries.
Key features
- Pitman arm nut
- Direct fit
- Covers ten early model entries
- Stock replacement application
- Manual steering listing
Restoring an early steering box
On early Jeeps and Willys vehicles the pitman arm nut clamps the arm onto a splined shaft, so a worn nut can let the arm loosen under load. Steering play, a clunk when turning, or a loose arm are common warning signs. Because these nuts are often reused on restorations, inspect the threads closely before fitting, and replace any nut that shows stretching or damage.
Pair the nut with a fresh cotter pin or lock arrangement where the design uses one, and make sure the arm and shaft are clean and tight before driving. Old steering boxes can also be worn, so check the shaft spline and the arm for cracks during a restoration. Confirm fit for your model year before ordering.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 639115 |
| UPC | 848399001648 |
| Product type | Pitman arm nut |
| Amount of drop | Stock replacement |
| Steering type | Manual steering |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Crown Automotive 639115 includes: 1959 Jeep CJ3 (Base); 1959–1971 Jeep CJ5 (Base); 1959–1971 Jeep CJ6 (Base); 1957–1964 Jeep FC150 (Base); 1957–1964 Jeep FC170 (Base); 1946–1949 Jeep Willys CJ-2; 1949–1952, 1954–1958 Jeep Willys CJ-3; 1955–1958 Jeep Willys CJ-5; 1956–1958 Jeep Willys CJ-6; 1941–1942 Willys MB (Base).
Crown lists vehicles from 1941 to 1971, such as the 1959 CJ3, the 1959-1971 CJ5 and CJ6, the FC150 and FC170 and the Willys MB. The CJ7 and all Wrangler models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check thread condition on the shaft when replacing the nut. A cotter pin or lock arrangement may be needed, so check your steering box.
What’s included
- One pitman arm nut, part number 639115









