Overview
The Trail Gear 130599-1-KIT is a pitman arm with the same drop as the factory arm, for the 1984–1995 Toyota 4Runner and the 1979–1995 Toyota Pickup with power steering, and it has an FJ80 tapered hole.
The arm is a solid one piece design, forged and extra strong and wide. It is intended for crossover steering and comes with a lifetime warranty with no questions asked.
The FJ80 tapered hole matches the fitting used on the FJ80 steering box, which is why the arm is aimed at crossover steering conversions.
It fits the 4Runner DLX and SR5 trims and the Pickup Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo trims, within the years shown.
Key features
- It has the same drop as the factory pitman arm.
- Solid one piece, forged design
- FJ80 tapered hole
- Extra strong and wide, as Trail Gear states
- Ideal for use with crossover steering
- Power steering application
- Direct fit
- Lifetime warranty, no questions asked.
Crossover steering basics
A crossover steering setup moves steering linkage across the front of the axle, and the pitman arm is the part that converts steering box motion into that cross movement. Arm drop, which sets how far the arm sits below the box, changes the geometry of the whole linkage. Matching the drop to the rest of the system is what keeps steering smooth and centered.
Pitman arms are usually replaced together with drag links, tie rod ends and the steering box when a conversion is done. Inspect the box mounting and the taper fit for wear before installing a new arm. A loose or damaged taper can cause play that feels like a problem with the arm itself.
- Compare arm drop with the factory arm before ordering
- Inspect tie rod ends during the same job
- Check the taper fit for wear before installing
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130599-1-KIT |
| UPC | 70000621550 |
| Product type | Pitman arm |
| Design | One piece, forged |
| Tapered hole | FJ80 |
| Amount of drop | 4 inches, matching the factory arm drop |
| Fit type | Direct fit |
| Steering type | Power steering |
| Warranty | Lifetime warranty |
Vehicle fitment
It fits two Toyota models with the trims below.
- 1984–1995 Toyota 4Runner (DLX, SR5)
- 1979–1995 Toyota Pickup (Base, Base Turbo, DLX, DLX Turbo, SR5, SR5 Turbo)
Newer Toyota trucks such as the Tacoma and models before 1979 are outside this fitment. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The arm has an FJ80 tapered hole and is intended for crossover steering. Follow the standard steering service procedure and have a qualified technician check the steering after installation.
What’s included
Check the package contents against your installation before starting.







