Overview
The Jeep S0103336 is a factory style pitman arm washer for the 2007–2016 Jeep Wrangler (JK), in 2-door and 4-door models.
The washer sits under the pitman arm nut and locks the nut down. It is a plain replacement with no drop, intended to restore the original fastening arrangement on the steering box shaft.
The matching nut is a separate item and must be ordered alongside the washer. Confirm the steering type on your truck before fitting.
For Wrangler owners the washer is a maintenance item. When a pitman arm is removed during a steering or lift project, replacing the washer with a factory style part keeps the fastening of the arm as Jeep designed it. It is small hardware, but it belongs to a steering joint, so use the correct part for a 2-door or 4-door JK.
Key features
- Factory style replacement part
- Locks the nut down
- Direct fit
- Stock replacement with no drop
- Covers 2-door and 4-door Wrangler JK models
- Covers the 2007–2016 model years
Why the washer matters
A pitman arm washer sits between the nut and the arm, so it helps hold the fastening at the steering box shaft. Even though it is small, it is part of a steering joint, and a worn or incorrect washer can let the nut loosen under load. Keeping the original fastening arrangement helps the joint behave the way it was designed to.
When the pitman arm is removed for a steering or lift project, inspect the nut threads, the shaft and the washer for wear before reassembly. Use a fresh nut with a new washer when the old pieces show damage, and confirm torque with a suitable tool. A qualified technician can check steering play after the work is complete.
- Inspect the shaft threads for damage
- Use fresh hardware when old parts show wear
- Check steering play after reassembly
Specifications
| Brand | Jeep |
|---|---|
| Part number | S0103336 |
| UPC | 70000521230 |
| Product type | Pitman arm washer |
| Amount of drop | Stock replacement |
| Fit type | Direct fit |
| Steering type in specifications | |
| Vehicle coverage | Jeep Wrangler JK, 2007–2016 |
Vehicle fitment
It fits the 2007–2016 Jeep Wrangler (JK), including the Unlimited trims: 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X.
- 2007–2016 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X)
Only the 2007–2016 Wrangler (JK) is named. The 2017–2018 JK and the Wrangler JL are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The washer works with the pitman arm nut on a steering joint. Confirm the correct torque for the pitman arm nut before tightening, and have a qualified technician verify the steering after installation.
What’s included
The S0103336 is the washer only.
Not included: the pitman arm nut, which is a separate part.









