Overview
The Pro Comp FD800 is a 4 inch drop pitman arm for power steering on 2011-2016 and 2018 Ford F-250 Super Duty and F-350 Super Duty trucks. It mounts at the front.
Pro Comp says its pitman arm keeps the steering in line through rough terrain. Lowering the drag link end gives a better link angle on a lifted truck, which is the purpose of any drop arm.
The model years skip 2017, so check the year of your truck against the list.
The later Super Duty trucks have their own front end, which is why this arm is separate from the FD700.
The F-250 and F-350 Super Duty trucks in these years share a front end, so one arm fits both. The drop is 4 inches.
The 2017 model year is not included in this range, so confirm fit with the year on your truck before installing.
Key features
- 4 inch drop pitman arm
- Super Duty application
- Power steering
- Front position
- Direct fit
Steering on later Super Duties
Later Super Duty trucks have their own front end, so the arm is built for that layout and is not interchangeable with older models. A drop arm reduces the drag link angle on a lifted truck, which keeps the steering feeling stable and reduces stress on the joints. Check the year of your truck carefully before buying, since model years in the gap are a common cause of mismatched parts.
Before installation, inspect the tie rod ends, drag link and steering stabilizer for play. Use a puller to release the old arm, center the steering box, and check clearance through full lock. Once the job is done, an alignment helps confirm the new geometry, and a short road test will show any wander or vibration that needs follow-up.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | FD800 |
| UPC | 614901023374 |
| Product type | Drop pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Steering type | Power steering |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp Suspension FD800 includes: 2011–2016, 2018 Ford F-250 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT); 2011–2016, 2018 Ford F-350 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT).
Pro Comp lists 2011-2016 and 2018 only, so the 2017 model year is absent. The 2005-2010 Super Duty trucks and other Fords are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Release the drag link end from the old arm, then pull the arm with a puller. Install the FD800 with the steering box centered, tighten the nut and check clearance through full steering lock.
What’s included
- One pitman arm, part number FD800







