Select your vehicle

Crown Automotive Tie Rod End Boot – J0645134

Crown Automotive

$9.95Usually ships within 6 to 7 days
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 1:50 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Replacement tie rod end boot, part number J0645134
  • Listed fitment: 1941–1971 Jeep CJ3, CJ5, CJ6 and Willys CJ and MB models
  • Manufacturer-listed direct fit
  • Brand: Crown Automotive; UPC 848399052657

Description

Overview

The Crown Automotive J0645134 is a tie rod end boot for listed Jeep CJ and Willys models from 1941 to 1971. A tie rod end boot is the flexible cover that fits over a tie rod end and helps keep dirt and water out of the joint. Crown Automotive makes replacement parts for Jeep vehicles, and this boot sits in its steering parts line.

Match your vehicle to the years and models below before comparing this boot with the one you are replacing. Part number J0645134 is the identifier to check against the original boot.

Key features

  • Replacement tie rod end boot in the Crown Automotive steering parts line
  • Listed by the manufacturer as direct fit for the models below
  • Manufacturer part number J0645134, UPC 848399052657
  • Fits early Jeep CJ3, CJ5 and CJ6 and Willys CJ and MB models from 1941 to 1971.

Keeping the joint sealed

A tie rod end boot keeps dirt, water and grit away from the ball joint, where wear can spread quickly once contamination gets in. On older CJ and Willys steering, a cracked or missing boot often shows up as a dry joint, grit inside the grease or play that builds over time. Inspect the boot whenever the front end is serviced, and look for splits along the folds.

When replacing a boot, clean the joint surface and check the tie rod end for play before fitting the new cover. A boot over a worn end will fail early. Fill the joint with the correct grease if the design calls for it, and avoid overfilling, which can push the boot out of shape. Re-inspect the boot after the first trail drive to confirm it has seated properly.

  • Look for splits along boot folds
  • Check joint for play before fitting
  • Re-inspect after the first trail drive

Specifications

Brand Crown Automotive
Part number J0645134
UPC 848399052657
Part type Tie rod end boot
Fit type Direct fit, per manufacturer listing
Model years listed 1941 to 1971

Vehicle fitment

It fits the 1941–1942 Willys MB; 1946–1949 Willys CJ-2; 1949–1952 and 1954–1958 Willys CJ-3; 1955–1958 Willys CJ-5; 1956–1958 Willys CJ-6; 1959–1971 Jeep CJ5 and CJ6; 1959–1960 and 1966 Jeep CJ3; and 1966–1968 Jeep CJ5A and CJ6A, with Base as the trim covered.

The list does not include Jeep CJ7 models or any Wrangler. Match your year, model and trim against this list before you select this part.

What’s included

Make sure your installation needs no more than what arrives in the box, and plan for the boot alone unless other parts are needed.

SKU: CROJ0645134 Category:

Specification

Shipping weight 0.10 lbs
Package dimensions 1.50 × 1.50 × 0.80 in
brands

Fitment

VehicleYearsTrims
Jeep CJ31959–1960, 1966Base
Jeep CJ51959–1971Base
Jeep CJ5A1966–1968Base
Jeep CJ61959–1971Base
Jeep CJ6A1966–1968Base
Jeep Willys CJ-21946–1949All
Jeep Willys CJ-31949–1952, 1954–1958All
Jeep Willys CJ-51955–1958All
Jeep Willys CJ-61956–1958All
Willys MB1941–1942Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is part number J0645134?

J0645134 is the Crown Automotive part number for this tie rod end boot, and its UPC is 848399052657. Compare the boot with your original for size and material before fitting it.

Will this boot fit my Jeep CJ5?

Yes, for a 1959–1971 Jeep CJ5 in Base trim. Confirm your year and trim before ordering, especially for CJ7 applications.

Which Willys models work with this boot?

The list names the Willys MB from 1941 to 1942, the Willys CJ-2 from 1946 to 1949, the CJ-3 from 1949 to 1952 and 1954 to 1958, and the CJ-5 and CJ-6 from 1955 to 1958.

Does the boot come with clamps or hardware?

Plan for the boot alone. Confirm what arrives in the box matches your installation plan, and buy clamps separately if your original used them.

Should both tie rod ends be sealed at the same time?

Often, yes. Both ends share the same steering load and exposure to dirt, so a boot that has started to crack on one side is often a sign the other side is close behind. Inspecting both at the same service is a practical way to avoid repeat work.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon