Overview
The Crown Automotive 52060052K is a tie rod assembly for the 2007–2018 Jeep Wrangler. The assembly links knuckle to knuckle across the front axle and is for left-hand-drive vehicles only.
The assembly comes with a tie rod, an adjusting sleeve and an outer tie rod end.
Key features
- Tie rod assembly, knuckle to knuckle
- Includes tie rod, adjusting sleeve and outer tie rod end
- For left-hand-drive vehicles only
- Direct-fit design
Choosing a tie rod assembly
A tie rod assembly carries steering input from the steering box or rack to the front wheels, and it sets the toe angle that keeps the tires tracking straight. On a Wrangler the outer tie rod end takes the most movement, because it pivots with the knuckle every time the wheel turns or the suspension cycles. Off road, rocks, ruts and trail impacts push the linkage harder than paved driving does, so worn joints show up first as steering play or a wandering front end.
When choosing a replacement, match the steering side and the span before anything else, since a left-hand-drive assembly will not sit correctly in a right-hand-drive steering layout. Many owners replace the tie rod ends, sleeves and drag link together when one joint is worn, because the rest of the linkage has usually taken the same wear. After installation, have the toe set by an alignment shop and re-check the jam nuts and clamp bolts after the first few trail runs.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52060052K |
| Part type | Tie rod assembly |
| Span | Knuckle to knuckle |
| Steering side | Left-hand drive only |
| Contents | Tie rod, adjusting sleeve, outer tie rod end |
| Fit type | Direct fit |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler models equipped with left-hand drive.
Right-hand-drive Wranglers are not covered by this assembly. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Tie rod, adjusting sleeve and outer tie rod end.









