Overview
The Crown Automotive front sway bar link, part number 52059975AC, is a single front link for 2 and 4-door models. It connects the front sway bar to the suspension so the bar can limit body roll. The link is sold individually and marked as direct fit and non-adjustable.
Key features
- Single front sway bar link
- Marked as direct fit
- Non-adjustable length
- Sold individually
Replacing a worn sway bar link
A sway bar link carries load between the bar and the suspension each time the body leans in a turn. Over time the joint ends wear, the bushings or ball joints loosen, and the link starts to clunk over bumps or let the bar rattle. A single non-adjustable link keeps its length fixed, so the replacement has to match the old one in length and mounting points.
Links are often replaced in pairs, because the opposite side has usually seen similar wear. Before fitting a new link, compare its length, end fittings and mounting holes with the old one. Tighten the fasteners once the vehicle is back on the ground, and recheck them after the first few drives on rough roads.
- Check for clunks when the suspension cycles
- Inspect the end fittings for play by hand
- Compare link length before removing the old one
- Replace both sides together when one shows wear
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52059975AC |
| UPC | 848399038569 |
| Position | Front |
| Quantity | Single |
| Adjustability | Non-adjustable |
| Models | 2 and 4-door |
Vehicle fitment
Fit depends on the year and model of your vehicle. Compare this link’s length, end fittings and mounting holes with the link it replaces before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front sway bar link, sold individually. No hardware or mounting parts are named.








