Overview
The Omix-Ada tie rod assembly, part number OAI18054.07, is a front tie rod assembly for the 1991–2001 Jeep Cherokee (XJ). Omix-Ada lists fitment for the Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims.
This assembly is for the 1991–2001 Cherokee XJ range. The years and trims named above are the main guide to fit.
Key features
- Front position
- Built for the Cherokee XJ from 1991 through 2001
- Omix-Ada part number OAI18054.07
- Classic, Country and SE trims among those named
Cherokee XJ steering: 1991 to 2001
The front tie rod assembly is the link between the steering gear and the front knuckle on each side. Because it moves with every turn, its joints carry wear over time. Loose steering, a clunk over bumps and steering pull can all trace back to worn ends or a loose sleeve in the linkage.
Before replacing an assembly, check the rest of the front end for worn ball joints, control arm bushings and idler arm play. Replacing a worn end without checking these parts can leave the steering feeling off. Recheck toe after the job and road test at low speed first.
- Check ball joints and control arm bushings
- Inspect the idler arm for play
- Look for uneven tire wear on the front edges
- Road test at low speed after the job
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI18054.07 |
| Type | Tie rod assembly |
| Position | Front |
| Fitment type | Direct fit |
Vehicle fitment
Omix-Ada lists fitment for the 1991–2001 Jeep Cherokee (XJ) in Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims.
The 1984–1990 Cherokee XJ years are outside this range. Confirm your year, model and trim before ordering.
What’s included
Only the tie rod assembly is supplied, so plan any extra hardware before installing it.









