Overview
The Crown Automotive Oxygen Sensor, part number 56029049AA, is an oxygen sensor for Jeep Wrangler, Grand Cherokee, Liberty and Commander models with 2.4L, 3.0L, 3.6L, 3.7L, 3.8L, 4.0L, 4.7L, 5.7L, 6.1L or 6.4L engines. An oxygen sensor measures the oxygen content of the exhaust gas so the engine computer can adjust fueling, and the sensor position (before or after the catalytic converter) must match your vehicle.
The sensor also fits Dodge Durango, Dodge Journey, Dodge Nitro and Chrysler Pacifica applications. Position is given for each vehicle as front, rear, left or right, and as before or after the catalyst. Use the position together with the engine size when you check fit.
Key features
- Direct fit oxygen sensor
- Application notes give the sensor position for each vehicle: front, rear, left or right
- Covers before-catalyst, after-catalyst and before-or-after-catalyst locations
- Engine coverage runs from 2.4L through 6.4L, including the 3.6L and 4.0L engines
- Crown Automotive part number 56029049AA with UPC 848399087093
Choosing the right sensor position
Oxygen sensors report exhaust oxygen levels to the engine computer, which adjusts fuel delivery based on those readings. A sensor placed before the catalytic converter reads raw exhaust, while one after the converter monitors how well the catalyst is working. Using the wrong position can trigger a fault code even when the sensor itself is sound.
Sensor failure usually shows up as poor fuel economy, rough running or a check engine light with a sensor code. Before replacing one, verify the code with a scan tool and check the wiring for chafed insulation near the exhaust. When installing, let the exhaust cool, keep the new sensor’s wire routed clear of hot pipes, and inspect the connector for corrosion.
- Confirm the sensor position before buying
- Inspect the connector for corrosion
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56029049AA |
| UPC | 848399087093 |
| Part type | Oxygen sensor |
| Position | Varies by vehicle: front, rear, left or right |
| Sensor location | After catalyst, before catalyst, or before or after catalyst, by vehicle; left or right where specified |
| Engine sizes | 2.4L, 3.0L, 3.6L, 3.7L, 3.8L, 4.0L, 4.7L, 5.7L, 6.1L, 6.4L |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2007–2008 Chrysler Pacifica; 2004–2009 and 2011–2012 Dodge Durango; 2009–2012 Dodge Journey; 2007–2011 Dodge Nitro; 2006–2010 Jeep Commander (XK); 2001–2005 Jeep Grand Cherokee (WJ); 2006–2010 Jeep Grand Cherokee (WK); 2004–2011 Jeep Liberty (KJ); 2007–2013 Jeep Wrangler (JK); and 2001–2006 Jeep Wrangler (TJ).
Grand Cherokee WK2 (2011–2015) and Liberty KK (2008–2012) sensors are not confirmed for this part, so confirm those years before ordering. Wrangler JL and Gladiator JT models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the position in the application notes (front, rear, left or right, and before or after the catalytic converter) to the location on your vehicle before you begin. Let the exhaust cool before you remove the old sensor, and keep the new sensor’s wiring clear of the exhaust pipe.
What’s included
The package contents are a single oxygen sensor. Confirm whether a connector or harness is included before installing it.









